Motone 2 x SOMBRERO Billet Mirror 100mm - E-Mark - PAIR

This Product  : SOMBRERO / PAIR OF HANDLEBAR MIRRORS (Up or Under) E-MARKED L E24 / Lab Certified ULTRA THIN 4mm Mirror Head 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Included meaning this Mirror can work in either UP (stock) position or UNDER  All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone SOMBRERO Billet Mirror 100mm - E-Mark - SINGLE

This Product  : SOMBRERO / SINGLE HANDLEBAR MIRROR (Up or Under) E-MARKED L E24 / Lab Certified ULTRA THIN 4mm Mirror Head 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Included meaning this Mirror can work in either UP (stock) position or UNDER  All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone RIPPER BMX Handlebars 1-inch (25.4mm) for LC Triumph T100/T120/Bobber

Inspired by the BMX bikes we grew up riding, our new RIPPER handlebars bring dirt bike style and control to your Triumph modern classic. These 1-inch bars are a whopping 879 mm wide and 120 mm high, made of steel, and powder-coated black. 

Motone The SCARAB - Metal Screen/HeadLight Shroud/Bikini Cowl for Triumph Bobber

This is the Scarab made out of solid aluminium formed in a high pressure die cast mold - Available here in Matte Black Krackle Black Powder  We designed this bike to work with any of the Triumph Bobbers from 2018 to 2025 with 47mm Forks (so wont work on the original single disc bobber with the 41mm forks) We dont know yet if this will fit on the new 2026 bikes with the updated light - so will update that in due course   

Motone Gran TURISMO Billet Bar End Mirror - TYPE R (E-Mark) - Bar End - SINGLE - SILVER

This Product  : GRAN TURISMO / TYPE R / SINGLE BAR END MIRROR / SILVER EDITION E-MARKED L E24 / Lab Certified ULTRA THIN 4mm Mirror Head 100mm Mirror Head 6061-T6 Billet Aluminium Body SILVER ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone Alcantara Cobra Seat - Diamond Stitch - Triumph Bobber

Cobra Seat - Bolt on For Triumph Bobber - this is V2 of the seat base so it fits all bobbers from the first edition and including the latest 2026+ Version.   This is a 4mm thick steel base - powder coated black Injection Molded Polyurethane Foam Pad (Closed Cell Foam for max comfort) Custom Stitched Fully Covered - Ready to Bolt On (Complete replacement seat unit) ALCANTARA EDITION

Motone KANAGAWA Bonneville & Bobber Brake Discs / Rotors (Full Set)

Motone's new Kanagawa brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA 255 Rear Brake Disc / Rotor

Motone's new Kanagawa rear brake disc is designed to improve your Triumph's braking performance (and looks). Built from stainless steel, it’s precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA 310 Front Brake Discs / Rotors (pair)

Motone's new Kanagawa floating front brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone BUZZSAW 255 Rear Brake Disc / Rotor

Motone's new Buzzsaw rear brake disc is designed to improve your Triumph's braking performance (and looks). Built from stainless steel, it’s precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the drilled pattern helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone CYLON LED Taillight CE Street Legal Running & Brake Light

Motone APEX TRIUMPH BOBBER AIRBOX DELETE / ELECTRONICS BOX

The Critical Part of our upcoming APEX Airbox Delete / Breather Kit for the Triumph Bobber - Sold here as just the electonics cover/fusebox assembly  So you will need your own Air Filters and Breathers (and AIS Delete on euro5 )  This will all be available as a complete kit in the coming months but if you cant wait and dont mind sourcing your own filters the hard part - the airbox delete - is available here now.  

Motone 2 x AERONAUT Billet Bar End Mirror - TYPE S (80mm) - Bar End - PAIR

This Product  : AERONAUT/ TYPE S / PAIR OF BAR END MIRRORS (2 PCS) AERONAUT Design 80mm Mirror Head 6061-T6 Hot Forged Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective Glass Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone AERONAUT Billet Bar End Mirror - TYPE S (80mm) - Bar End - SINGLE

This Product  : AERONAUT/ TYPE S / SINGLE BAR END MIRROR  Stealth Triline Design 80mm Mirror Head 6061-T6 Hot Forged Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective Glass Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone 2X AERONAUT Forged Bar End Mirrors - TYPE R (E-Mark) - Bar End - PAIR

This Product  : AERONAUT/ TYPE R / PAIR OF BAR END MIRRORS (2 PCS) E-MARKED L E24 / Lab Certified 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone AERONAUT Bar End Mirror - TYPE R (E-Mark) - Bar End - SINGLE

This Product  : AERONAUT/ TYPE R / SINGLE BAR ENDMIRROR  E-MARKED L E24 / Lab Certified 100mm Mirror Head Hot Forged Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone APOLLO Grips - Full Metal Jacket - INCH Handlebar Models - BRASS

FULL METAL JACKET Grips machined out of Billet BRASS SOLD AS A PAIR - Fully Plug and Play including integrated Throttle Assembly PLEASE NOTE These are extremely small batch volume item, we will produce only 1-2 small batches per year Each grip weights around 500 gram  This version is suitable for the Inch Bar Triumphs so that means and of these from 2016 to today :  T100 / T120 / BOBBER / SPEEDMASTER 1200  SIGN UP FOR STOCK ALERTS TO BE INFORMED OF STOCK DROP

Motone BESOZZI Grips - Full Metal Jacket - INCH Handlebar Models - BLACK

FULL METAL JACKET Grips machined out of Billet 6061 T6 Aluminium and anodised BLACK SOLD AS A PAIR - Fully Plug and Play including integrated Throttle Assembly This version is suitable for the Inch Bar Triumphs so that means and of these from 2016 to today :  T100 / T120 / BOBBER / SPEEDMASTER 1200 

Motone Triumph Bobber Helmet Lock Kit (and Speedmaster)

This is the latest version of our popular helmet lock kit - with a specific cast bracket to fit on your TRIUMPH BOBBER (or late model Speedmaster) Fits all years Triumph Bobber 2017-2026+ Designed to fit on the stock airbox lugs - the kit works both on a completely stock bike or in conjunction with AJAX rear light/signal brackets which also use the same mounting point.  Can be fit at the same time as our pannier rails Kit comes with 2 Keys 

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black/Contrast Polished

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone KLINGER CLAMPS - 32mm - Rear Frame Cage Tube - Indicator/Light Mounts

Part of our series of KLINGER Clamps machined out of Billet aluminium this is the largest version we do at 32mm which is suitable for mounting tail signals or rear lights on the frame tube of your Triumph Bobber - will of course work on any 32mm The Klingers are designed to be used in conjunction with any Indicator or Light that runs on a M8 thread to clamp the assembly to your tube 

Motone KLINGER CLAMPS - 16mm - Suitable for Triumph Bobber Stock Fender Struts - Pair

These clamps precision machined out of billet aluminum and sold as a pair allow you to mount your M8 Indicator or Rear Lights to any 16mm frame tube or strut  In this case 16mm is the same diameter as used on the stock Triumph Bobber Fender Struts   

Motone Billet KLINGER CLAMPS 13mm - (Suitable for Rialto Struts) - Tail Light/Turn Signal Mounts - PAIR

Part of our new series of rear Light Clamps These clamps work an any 13mm diametre rail or Strut - such as found on our Triumph Bobber RIALTO Rear mudguard guard 

Motone TITAN BOLTS Titanium Brake Rotor Bolts - x14 pcs - BLACK Finish LC - Full Set (Dual Front Disc+Rear Disc)

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and  single rotor rear)  2016-to-today Triumph Twin Available here in BLACK BOLT SPEC : M81.25x30 Also available in natural, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

Motone TITAN BOLTS Titanium Brake Rotor Bolts - x14 pcs - Natural Finish LC - Full Set (Dual Front Disc+Rear Disc)

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and  single rotor rear)  2016-to-today Triumph Twin Available here in Natural Titanium finish BOLT SPEC : M81.25x30 Also available in PVD Black, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

Motone TWISTER Clutch Cable Adjuster - BRASS - M8x1.25x18

Part of our BRASS  range of components. This is the TWISTER - BRASSY edition Precision machined out of Billet  C36000 Brass - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - BLACK - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up.  Finished here in Physical Vapour Deposition BLACK Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - Natural Finish - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone PATRIOT Grips - Union Jack - Inch Handlebar Models - BLACK

Set of Custom Rubber Grips for your Triumph Bike include the full throttle assembly so they are plug and play  Throttle Inner Machined out of Billet 6061 T6 Aluminium Outer Rubber Grips with custom molded Union Jack pattern  SOLD AS A PAIR  This version is suitable for the Inch Bar Triumphs so that means and of these from 2016 to today :  T100 / T120 / BOBBER / SPEEDMASTER 1200   

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - BRASS

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone The Claw - Rear Number Plate Hanger - Triumph LC - Horizontal Plate

This is the CLAW Fits using the rear axle adjuster mount point - coupled with bent steel bars which have the number plate hanger aligned in the centre of rear wheel.   It comes with a laser cut plate for the number plate as well as our billet e-marked (lab tested street legal) PILLBOX LED Plate illumination light.   This has a 120cm of cable and terminates into Japanese spec 3.9mm Bullets.   The CLAW fits on any Triumph Twin from 2016 to now - we also make plug and play wiring loom adapters for all this bikes depending on which model you have   DDM021 #mce_temp_url#[Street Twin, Speed Twin 900, Street Scrambler, Scrambler 900, T100 LC, T120, Speed Twin 1200 EUR4 Only (rwu fork)] DDM016 [Bobber, Speedmaster, Scrambler 1200] DDM017 [Speed Twin 1200 - EUR5 onwards]      

Motone SIDEKICK SLIM (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)(US SPEC VERTICAL PLATE)

Fits any LC 2016 and up Triumph Twin  SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates  We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - POLISHED

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of the 3in1 Variation (Indicator, Brake, Running Lights) or the regular Turn Signal (T/S) only version though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - POLISHED  PLEASE NOTE: Does not work with new 2026 Bobbers

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - BRUSHED

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of the 3in1 Variation (Indicator, Brake, Running Lights) or the regular Turn Signal (T/S) version though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - BRUSHED to match stock seat  PLEASE NOTE: Does not work with new 2026 Bobbers

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - BLACK

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of either the 3in1 Variation (Indicator, Brake, Running Lights) or the T/S (Turn Signal aka Indicator version) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - BLACK PLEASE NOTE: Does not work with new 2026 Bobbers

Motone Triumph Bobber 47mm Smooth Spatz Fork Shrouds + Klingon Handlebar Mount Indicator Brackets

These are the SPATZ SMOOTH Fork Shrouds Bundled with Klingon HANDLEBAR MOUNT Indicator Brackets Custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end  The Klingons work with M8 Thread Indicators  HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit FITS 47mm Fork Bobber (and Bobber BLACK), and the the Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber) DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork   

Motone PIKE Brake and Clutch Lever Set - Triumph - Adjustable - Billet Aluminium Black

These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK TYPE R - REGULAR FIT (FOR MOST TRIUMPH TWINS) Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand After seeing all the cheap dangerous tat out there, as well as the gaudy colours that have ,we feel little place on a modern classic motorcycle we designed the PIKE levers to offer the best of both worlds in terms of style, quality and customisation. The PIKE levers fit MOST modern classic Triumph Twins from 2004 to the modern day The exception to this are the bikes with the Brembo master cylinders (TFC Bikes, Speed Twin 1200, Scrambler 1200 XC, Thruxton R/RS) - for these see Type B  AND SPEED TWIN 900 2025 ON PLUS SCRAMBLER 900 2026 ON - THESE NEED TYPE C (currently in development)   PIKE LEVERS TYPE R FIT ALL NEARLY ALL TRIUMPH TWINS (790cc and up) 2004 - NOW T100 & T120 - All Variants (Carb, EFI, Liquid cooled etc) 2004-  2025 TRIUMPH SCRAMBLER 900 (carb, efi, STREET SCRAMBLER, SCRAMBLER 900) 2016 - NOW TRIUMPH BOBBER / SPEED MASTER (all variants including America, all 900-1200cc etc)  2016 - 2024 STREET TWIN / STREET CUP / SPEED TWIN 900 2004 - 2015 THRUXTON (900cc variants)   

Motone PARABOLA Engine Oil Filler Cap - Dished - BRASS

Motone ICON LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone Wrap-Around Fork M8 (8mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)

Motone PARABOLA Engine Oil Filler Cap - Dished - Black

Motone Triumph OE Indicator Turn Signal Plug Wiring Adapter OE to 3.9mm Universal Bullet

Motone Ballista hot forged CHROMED vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel) These are Sold as a Pair and available here in CHROME finish  

Motone Triumph Engine Temp Gauge Oil Filler Cap - °C - Celsius

Motone Triumph Engine Temp Gauge Oil Filler Cap - °F - Fahrenheit

Motone Wrap-Around Fork M8 Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone ICON MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone 2 x TURISMO Billet Bar End Mirror - TYPE S (80mm) - Bar End - PAIR

This Product  : TURISMO / TYPE S 80mm / PAIR OF BAR END MIRRORS (2 PCs)  ULTRA THIN 4mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass Convex Reflective Glass TuV Glass  Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone TURISMO Billet Bar End Mirror - TYPE S (80mm) - Bar End - SINGLE

This Product  : TURISMO / TYPE S 80mm / SINGLE BAR END MIRROR  ULTRA THIN 4mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass Convex Reflective Glass TuV Glass  Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone 2 x TRILINE Billet Bar End Mirror - TYPE S (80mm) - Bar End - PAIR

This Product  : TRILINE/ TYPE S / PAIR OF BAR END MIRRORS (2 PCS) Stealth Triline Design 80mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective Glass Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone TRILINE Billet Bar End Mirror - TYPE S (80mm) - Bar End - SINGLE

This Product  : TRILINE/ TYPE S / SINGLE BAR END MIRROR  Stealth Triline Design 80mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective Glass Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone 2 x GRAN TURISMO Billet Bar End Mirror - TYPE R (E-Mark) - Bar End - PAIR

This Product  :  GRAN TURISMO / TYPE R / PAIR OF BAR END MIRRORS (2 PCS) E-MARKED L E24 / Lab Certified ULTRA THIN 4mm Mirror Head 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone Gran TURISMO Billet Bar End Mirror - TYPE R (E-Mark) - Bar End - SINGLE

This Product  : GRAN TURISMO / TYPE R / SINGLE BAR END MIRROR  E-MARKED L E24 / Lab Certified ULTRA THIN 4mm Mirror Head 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED GLOSS FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone 2X TRILINE Billet Bar End Mirrors - TYPE R (E-Mark) - Bar End - PAIR

This Product  : TRILINE/ TYPE R / PAIR OF BAR END MIRRORS (2 PCS) E-MARKED L E24 / Lab Certified 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone TRILINE Billet Bar End Mirror - TYPE R (E-Mark) - Bar End - SINGLE

This Product  : TRILINE/ TYPE R / SINGLE BAR ENDMIRROR  E-MARKED L E24 / Lab Certified 100mm Mirror Head 6061-T6 Billet Aluminium Body BLACK ANODISED MATTE FINISH Hard Scratch Resistant Automotive Glass R1400 Convex Reflective - TuV Approved Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Motone Billet Mirrors available either as single mirrors or in pairs in size variants : Type S (Small 80mm)  Type R (Regular 100mm - Emarked) - All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass) 

Motone Sidekick (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)

Fits all 2016 and UP Triumph Twins (Especially BOBBER/SPEEDMASTER/T120/T100LC/SPEED TWIN etc) We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU604) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Motone The SPATZ - 47mm Fork Shrouds Triumph Bobber/Speedmaster Integrated Indicator Mounts

These are the SPATZ  Our new custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end as well as including a set of mounts for any Indicator you might want to fit (and associate blanking plugs to make them neat whichever style you fit)  That means they will work with any M8 Indicator (like our PICO), or any M10 (Like our Billet), or the standard OEM Triumph (standard size or smaller ones) HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit   FITS 47mm Fork Bobber (and Bobber BLACK), and the the Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber) DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork   

Motone CUTLASS - Triumph Bobber Chain Guard - Gloss Black

This is the CUTLASS our new Chain Guard for the Triumph Bobber and Speedmaster 1200 Its a proper full length chain guard not a strange intimation of one that seems to have become popular of late on the aftermarket, presumably because its alot easier to make a little one than a proper one   Made out of Steel and finished in Gloss Black - Bolt-On for your Bike

Motone SCOOP - Triumph Bobber Shorty Front Mudguard - Gloss Black

This is the SCOOP our new shorty Front Mudguard for all Twin Disc Triumph Bobbers The only Shorty Front Mudguard you can get for your Triumph Bobber that is both properly made of STEEL like the OE one and comes ready painted so its fully Bolt on Using the Scoop means you can retain the torsional stability of the massive 47mm Forks around corners as our Mudguard includes the integrated Bracing as part of the design - available in here hloss Black Automotive finish so its bolt on for your Triumph Bobber    

Motone The Capos - Fork Top Caps Pair - Bobber Black / Speedmaster 47mm Fork - Contrast Aluminium

THIS VERSION : BILLET ALUMINIUM - Finished in Wrinkle Powder Coat Black and Contrast Polished Top Face  Fits all years Bobber Black / Bobber (with twin discs)  47mm Fork Bobber Black Speedmaster from 2021 On   

Points ACG Cover/Badge - MOTONE Logo - Polish/Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - Contrast Polished with the MOTONE logo on outside face Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics 

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone The Zephyr MK.II - BOBBER/Thruxton Intake Covers / Throttle Body Trim - Black

The Zephyr - Metal Intake Covers in Black Suitable for your THRXTON 1200 or TRIUMPH BOBBER Motorcycle Fits all years Triumph THRUXTON 1200 (S/R/RS) and BOBBER and SPEEDMASTER 1200 Formed out of High Pressure Die Cast Aluminium  Sold as a Set with both Left and Right pieces included and finished in our signature wrinkle powder Black  These are a bolt on piece and can be fit at home in minutes 

Motone PICO MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Points ACG Cover/Badge - MOTONE Logo - Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - with the MOTONE logo on outside face Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics

Motone PICO LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone Ranger Foot Pegs - Triumph Bobber - BRASS

HOT FORGED OUT OF BRASS   These are the Rangers - Now available for your Triumph Bobber    These will not fit the Speedmaster if you are running forward controls (if you have moved the pegs back to Bobber mid position then they will fit ok) All good with all years Triumph Bobber   LIMITED Availability 

Motone Craig-Bars Engine Frame Crashbars LC - BLACK

The Craig Bars - Named after Craig, because if he had a set of these fitted to his bike when he dropped it he wouldnt written if off. Dont be a Craig : We have designed these to be the best bars on the market - with the 2 interconnecting cross bars, plus the highly buttressed welding on the mounting brackets these are proper hardcore compared to some of the more "dresser" bars you might see on the market . Built to Survive.   25MM O/D SS TUBING BLACK VERSION   v2 fits range including Bobber T120 T100 Lc Speed Twin 900  Speed Twin 1200 Thruxton 1200 Street Twin     

Motone RIALTO - Triumph Bobber Short Rear Mudguard - Gloss Black

This is the RIALTO - we really spent alot of time on this one Custom Rear Fender for the Triumph Bobber  Made out of Steel and finished in Gloss Black - Bolt On including the two struts (fender stays) as pictured - with all the OEM fixing positions including chain guard   

Motone Points ACG Cover/Badge - Union Jack - 2 Tone Brass & Black

SOLID BRASS ENGINE BADGE - 2 Tone - BLACK and BRASS  Krackle Black and Polished Brass This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone Clutch (LHS)Cover/Badge - Union Jack - 2 Tone Brass & Black

SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face  This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike) Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone RAZOR - Triumph Bobber Ultra Short Rear Mudguard - Gloss Black

This is the RAZOR - the shortest rear mudguard we do for the Triumph Bobber - for the ultimate clean look rear end whilst still offering a level of protection for the electronics/airbox of the bike  Made out of Steel and finished in Gloss Black - Bolt On - with all the OEM fixing positions including chain guard etc   

Motone Points ACG Cover/Badge - Union Jack - Solid Brass

SOLID BRASS ENGINE BADGE This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - BLACK

 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Gemini - BLACK Bar End Finishers

Gemini Handlebar Finishers - High Pressure Die Cast Aluminium - Powder Black Krackle Black  - Sold as a Pair These are suitable for Street Twin Street Cup  Street Scrambler T100 T120 Bobber Speedmaster Thruxton Speedtwin

Motone King Cobra Seat - Diamond Stitch - Triumph Bobber

King Cobra Seat - Bolt on For Triumph Bobber - this is V2 of the seat base so it fits all bobbers from the first edition and including the latest 2026+ Version.  

Motone Defender MKII (Bobber) - Sump Guard - Silver

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard Hand Brushed and then Anodised Clear Silver Designed and Built to Last - there is alot of junk out there  DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc). Will not fit with factory forward controls therefore wont work with the Speedmaster 1200 which has forward controls on most common variants   

Motone Defender MKII (Bobber) - Sump Guard - Black

Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard Hand Brushed and then Anodised Black  Designed and Built to Last - there is alot of junk out there  DEFENDER MKII Suitable for all years TRIUMPH BOBBER 1200 (Both the Bobber Black, Standard Bobber, Single Disc Bobber etc). This part will not fit with factory forward controls therefore wont work with the Speedmaster 1200 which has forward controls on most common variants   

Motone Rear Wiring Loom - Plug and Play - Bobber/Scrambler 1200/Speed Master

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc without having to chop into the stock loom This Loom our part code DDM016 fits    All Years Triumph Bobber  All Years Speedmaster 1200 All Years Scrambler 1200    Note that his loom contains a resistor to stop the issue causing engine warning light when fitting aftermarket Tail lights.   Wired as Follows Orange - R - is RHS Indicator Brown - L - is LHS Indicator As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (on on each side)  There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.  And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth.  Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts...    ORANGE (Single Bullet) - Right Indicator BROWN (Single Bullet) - Left Indicator GREEN (Single Bullet) - Aux / Spare / License Plate Illumination (if required as seperate)   YELLOW (Double Bullets) - Running Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights) RED (Double Bullets) - Brake Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights)   BLACK - Earths/Neutral 

Motone Clutch Badge - Union Jack - Solid Brass

Motone Quality - Hot Forged in Solid Brass  Union Flag Motif  Bolt on for your Triumph Twin - Fits all the Twins 2016 and up (Street Twin, Speed Twin, Street Cup, Scrambler 1200, Bobber, Speedmaster, etc)  

Motone King Cobra Seat - Vertical Ribs - Triumph Bobber

When the Triumph Bobber first came out the first thing I wanted to change was the seat, if only it was that simple 3 or 4 years later - this is the result - for safety we made the pan out of 4mm Thick Steel which made for some fairly hefty tooling for comfort we made the foam using a high density polyurethane injection moulded closed cell foam We have done a few different stitch patterns - this one we call the King Cobra  Bolt on For Triumph Bobber - this is V2 of the seat base so it fits all bobbers from the first edition and including the latest 2026+ Version.

Motone The Beltane - Bobber/Speedmaster Battery Strap - Brown Leather & Brass

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

Motone The Beltane - Bobber/Speedmaster Battery Strap - Black Leather & Brass

Premium Grade Leather - Stitched Back - Brass fittings and Stainless Clip

Motone The Capos - Fork Top Caps Pair - Bobber Black / Speedmaster 47mm Fork - BLACK

Machined out of GR5 Billet Titannium - Finished in Wrinkle Powder Coat Black Fits all years Bobber Black / Bobber (with twin discs)  47mm Fork Bobber Black Speedmaster from 2021 On     

Motone The Capos - Fork Top Caps Pair - Bobber / Speedmaster 47mm Fork - Titanium

Machined out of GR5 Billet Titanium  Raw Machined Titanium Finish     This particular listing is for the 47mm Fork Bobber, which is also the fork used on the Speedmaster from 2021 On   

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - LC - Contrast Polished

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  Finished in Wringle Powder Coat Black which we then mask and then mirror polish the top outer face in our signature style Fits all 2016 to Now Triumph Twins including Street Twin / Street Cup / Street Scrambler / T100 LC / T120 / Scrambler 1200 / Bobber / Speedmaster 1200 / Thruxton 1200 / Speed Twin 

Motone The Gaffer - Rear Axle Nut - Titanium - Contrast Polished

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy  Finished in Wrinkle Coat Black - With Mirror Polished Top Face 

Motone Forged Aluminium Chain Adjuster Block Kit - BLACK

Forged in Aluminium and Powder Coated Black with a Polished Washer Plate Suitable for use on all the liquid cooled Twins including  Street Twin  Street Scrambler  Street Cup Bobber T100 T120 Thruxton 1200/R/RS Scrambler 1200 Speedmaster  Speed Twin  

Motone Tailored Workshop Cover - Bobber

Tailored to protect your Pride and Joy - Double Layered - Double Stitched - UV proof outer, silky inner to protect paint work against scratches  For use inside Garage/House/Kitchen/Workshop   Tested to fit on :  Bobber 1200 / Speedmaster 1200  

Motone Ignition Relocation Wiring Loom - Plug and Play - LC

The idea behind this wiring loom adapter is so you can more Ignition Barrel from its stock position (usually on the top yoke depending on the bike) to elsewhere on the frame  This is ideal if you have a custom yoke setup (we are working on those too)  For now the wiring loom is available here first for those that have their own custom yokes already etc - as of today we also have the barrel bracket ready to relocate to the sprocket cover and soon we will also have custom yokes too 

Motone The Gaffer - Rear Axle Nut - Titanium - BLACK

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy  Finished in Wrinkle Coat Black

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Brass

Motone The Capos - Fork Top Caps Pair - Early - Titanium

The Capos - Machined out of Biller GR5 Titanium Alloy to compliment "The Godfather" Titanium Yoke Nuts  Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-Present T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU54 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU563

Motone The Gaffer - Rear Axle Nut - Titanium - Spun Finish

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy   

Motone Points ACG Cover/Badge - Ribbed - Solid Brass

Motone Quality - SOLID BRASS ENGINE BADGE This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone Ranger Foot Pegs - Rider Set - Bobber - POLISH

Investment cast out of 300 Series Stainless Steel and POLISHED  - These are the Rangers - Now available for your Triumph Bobber    Please note You can fit these to a Speedmaster only if you have moved pegs back from forward position to middle like on the Bobber  

Motone Ranger Foot Pegs - Rider Set - Bobber - BLACK

Investment cast out of 300 Series Stainless Steel and Powder Coated in Black - These are the Rangers - Now available for your Triumph Bobber    These will not fit the Speedmaster if you are running forward controls (if you have moved the pegs back to Bobber mid position then they will fit ok) All good with all years Triumph Bobber  

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - LC - Spun Metal Finish

Machined out of GR5 Titanium Billet Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut - this is the Godfather, matching style fork top caps are coming soon known as the Capo's  Available here in Spun Metal Finish - we also have black and contrast versions in the works   Street Twin Speed Twin Street Scrambler Street Cup Bobber Thruxton 1200 Scrambler 1200 T100 T120 Speedmaster 1200   Please note if you have a 2001-2015 Bonnie another Size Yoke is in the works  

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed

Motone Engine Oil Filler Cap - Roswell - Solid Black

Motone Voyager Rear Rack - for Triumph Bobber/Indian Scout/Harley/R18 BMW - Polished

Formed out of Type 304 Stainless Steel and Mirror Polished Touring rack including all the lugs and mounting points as pictured  Comes with hardware/fixings and rubbers Remove your stock mudguard and drill in 4 places to fit.   Voyager Universal Rack works with a bunch of different spec rear Mudguards/fenders As the lugs are rubber mounted there is some tolerance in them for fixing to different diameter fenders - typically this would fit on a fender that is around a  tyre for a 15 or 16 inch diameter wheel - Triumph Bobber, Indian Scout Bobber, Typical Harleys as well as custom Japanese chops etc.   R18 BMW and more

Motone Voyager Rear Rack - for Triumph Bobber/Indian Scout/Harley/BMW R18 - Black

Formed out of Type 304 Stainless Steel and Powder Coated Black Touring rack including all the lugs and mounting points as pictured  Comes with hardware/fixings and rubbers Remove your stock mudguard and drill in 4 places to fit. Voyager Universal Rack works with a bunch of different spec rear Mudguards/fenders As the lugs are rubber mounted there is some tolerance in them for fixing to different diameter fenders - typically this would fit on a fender that is around a  tyre for a 15 or 16 inch diameter wheel - Triumph Bobber, Indian Scout Bobber, Typical Harleys as well as custom Japanese chops etc.    Also fits well on the R18 BMW   

Motone Morningstars - Titanium Hero Blobs / Peg Scrapers / Lean Feelers

Machined out of GR5 Billet Titanium    These peg scrapers will help let you and any friends behind you, discover an appropriate safe riding angle. Being made out of Titanium should they happen to touch the road there may, by sheer coincidence, be massive bloom of safety sparks behind you.  Version A - these are suitable for all the LC Triumphs 2016 and Up  - alternative version for the older Triumphs also coming soon (the fit is the same but the older bikes sit higher from the road so need a longer feeler) 

Motone The Guvnors - Fork Top Caps Pair - Bobber Black / Speedmaster 47mm Fork

Hot Forged out of Solid Brass Billets, machined and then Polished these fork top caps are easy enough to swap out and add some brass to your bike - they are also designed to fit well with The Boss our brass Yoke Nut This particular listing is for the 47mm Fork Bobber Black, which is also the fork used on the Speedmaster from 2021 On  For Speedmasters from 2002-2016 you need part MMU512 ,  for the 41mm Liquid Cooled Speedmasters 2018-2020 You need part MMU514  

Motone Giger - Short Reach Headlight Brackets 41mm - Black

Motone Stainless Steel Exhaust Studs - Pair

Exhaust Studs Suitable for all the Liquid Cooled Triumph Twins 2016 to now Sold as a pair - machined individually out of grade 304 Stainless Steel  Fits Street Twin Street Cup Street Scrambler T100 LC T120 LC Speedmaster Bobber Scrambler 1200 Thruxton Speed Twin

Motone The Guvnors - Fork Top Caps Pair - Early - Brass

Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-2018 T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU516 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU514

Motone Stainless Franken Bobbins - Paddock Stand Fixing Kit

Stainless Steel Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster Franken Bobbins  They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long  The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt Includes :  Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200,  Triumph Speed Twin 1200, Royal Enfield Interceptor ,  Triumph Speed Triple, Street Triple 

Motone Black Cylinder Stud Knuckles Caps

Cold Forged out of Aluminum Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup. Supplied here in Stealth Black  

Motone Polished Cylinder Stud Knuckles Caps

Cold Forged out of Aluminum Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup.  

Motone Ventura - Bobber/Speedmaster - Ribbed Side Panels - Gloss Black

    Custom Ribbed side panels for Triumph Bonneville Bobber / Speedmaster 1200 High quality precision injection molded ABS. Ribs aligned specifically with the fin angle on the stock cylinders Aluminium mesh on panel indents   GLOSS BLACK AUTOMOTIVE PAINT FINISH

Motone Magnum Force - Brass Exhaust Clamp Nuts

Magnum Force Forged Brass Exhaust Clamp Stud Nuts Set Of 4 - Hot Forged Individually out of solid Brass  Will fit all the 2001 to Now Triumph Twins Street Twin / Street Cup / Street Scrambler / Scrambler 1200 / Thruxton / Speed Twin / Bobber / T100 / T120 / SE / Scrambler 900 / Speed Twin 900 etc etc

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Polished

Motone CHOPSAW Engine Oil Filler Cap - Shot Blast - Frosty

Motone CHOPSAW Engine Oil Filler Cap - Hard Black - Stealth

Motone Solid Brass Monza Cap Kit - Limited Run

 

Motone Indicator/Turn Signal Brackets - for LC Triumphs - 8mm

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Contrast Polish

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black Contrast Polished

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Domed

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Black

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Ballista hot forged brass vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel These are Sold as a Pair and available here in brass finish  

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Brushed

Motone Brass Cylinder Stud Knuckles Caps

Cold Forged out of Brass Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup. Although they will arrive shiny being made out of solid brass they start to really look good once a patina has developed after a few weeks of usage. 

Motone Clutch side engine casing bearing/Seal Kit LC

Refresh kit if you are replacing the clutch cover   T3600095 DUST SEAL. 12X18X4.5  T3800110 BEARING T3800156 BEARING,NEEDLE ROLLER,7X11X9  T3800001 BEARING,NEEDLE ROLLER,20X14X12  T3600088 SEAL,OIL,14X22X4.5

Motone Extended 66mm Long Gear Shifter Lever End Peg - Ribbed - Black

Custom CNC turned out of aviation grade billet 6061t aluminium. EXTENDED LENGTH : TOTAL 66mm (2.5 Inch) Long Ribbed foot peg as pictured in Black.  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle.

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Polish

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Black

Motone "THE BOSS" Top Yoke / Steering Stem BRASS Nut - LC

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut    Street Twin (Speed Twin 900) Speed Twin  Street Scrambler (Scrambler 900) Street Cup Bobber Speedmaster Thruxton Scrambler 1200 T100 T120   Please note if you have a 2001-2015 Bonnie check out MMU069 instead  

Motone Engine Oil Filler Cap - Roswell - Brass

Motone Brass Franken Bobbins - Paddock Stand Fixing Kit

Brass Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster Franken Bobbins  They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long  The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt Includes :  Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200,  Triumph Speed Twin 1200, Royal Enfield Interceptor ,  Triumph Speed Triple, Street Triple 

Motone Copper Exhaust Ring Gaskets

Suitable for use on all Liquid Cooled Triumph Bonneville 900 and 1200 cc Motors 2016 and up Triumph Bonneville T100 Triumph Bonneville T120 Street Twin Street Cup Street Scrambler Speed Twin Bobber Speedmaster Scrambler 1200   

Motone Vintage Hot Forged Brass Chain Adjuster Block Kit

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit. Namely Hot Forged Brass.   To produce a truly individual product the chain adjusters are hand polished to reveal the facets of the forging process. Thick Grade 304 Stainless Boss also included Suitable for use on all the liquid cooled Twins including  Street Twin  Street Scrambler  Street Cup Bobber T100 T120 Thruxton 1200/R/RS Scrambler 1200 Speedmaster  Speed Twin  

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Polished

Classic style parcel rack. A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel and mirror polished Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany      Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Black

The Aero A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel finished in black powder coat. Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany.   Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone Bobber/Speedmaster Pannier/Luggage Rails - Pair - Black

Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Investment Cast Brackets Smooth Welds Powder Coat Black Finish High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - BLACK Suitable for Triumph Bonneville Bobber Triumph Bonneville Bobber Black Triumph Bonneville Speedmaster 1200 - (DOES NOT WORK WITH 2026 MODELS)

Motone Monza Cap Kit for Triumph and HD - Black

 

Motone Monza Cap Kit for Triumph and HD - Black/Contrast Polished

 

Motone Bobber/Speedmaster Pannier/Luggage Rails - Pair - Polished

Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Investment Cast Brackets Smooth Welds Mirror Polished Finish     High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Mirror polished Suitable for Triumph Bonneville Bobber Triumph Bonneville Bobber Black Triumph Bonneville Speedmaster 1200 - (DOES NOT WORK WITH 2026 MODELS)

Motone Finned Exhaust Clamps - LC - Black/Contrast Polished Fins

VERSION 2.0 - INVESTMENT CAST STAINLESS STEEL Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here finished in Black with Polished fin outer edges!  Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the stock headers on Thruxton 1200 /Speed Twin 1200 which have a link pipe at the exhaust port which gets in the way.   These fit 2016 and UP : Speed Twin 900, Street Twin, Street Cup, Street Scrambler, Scrambler 900, Speedmaster, Bobber, T100, T120    

Motone Billet Radiator Guard Kit - Union Jack - Black Wide (Bobber/Speedmaster)

Wider Version for Wider Rads of the Bobber and Speedmaster only Motone Rad Guard for all Liquid Cooled Triumph Twins. Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black. Rear grill is laser cut out of steel and finished in a black powder coat.   Full assembly comes ready to fit to your bike as a complete kit.   

Motone Classic Leather Key Fob

Handmade by skilled craftsmen from extra thick, high quality Top Grain Cowhide Leather.  Tanned and oiled using traditional processes that will in time produce a vintage worn-in patina. Hand stitched border with burnished edges framing the embossed Motone legend. The perfect way to keep you keys safe and complement the look and style of your modern classic or custom build.   This is first in a range of stylish hard wearing leather goods from Motone Customs.   Built to Last long lasting weather resistant finish

Motone Clutch Side Engine Cover Gasket 900/1200 LC Twins

Suitable for all Triumph twins 2016 to now both 900 and 1200cc Engines  

Motone Alternator/Stator/Timing Cover Gasket 900/1200 LC Twins

Suitable for all Triumph twins 2016 to now both 900 and 1200cc Engines  

Motone Finned SS Exhaust Clamps - LC - Hand Polished Finish

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Painstakingly Hand Polished finish Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 (only the 1200 variant has the link pipe at the header which clash with the fins) These fit 2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120, Speed Twin 900, Scrambler 900 Version 2.0 formed out if investment cast STAINLESS STEEL  These are only available in limited numbers  HAND POLISHED IN STAINLESS STEEL - If you have ever tried to Polish something this shape in Stainless you may begin to appreciate the amount of time that has gone into getting these ready -  We are planning to get a small batch of these ready once every 6 months or so when we have time - these are not a mass market item - each fin is polished with various different grade polishing compound to end up with with the final finish in the traditional style and as such will Patina quickly.

Motone Monza Cap Kit for Triumph and HD - Brushed Finish

 

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Raw Finish

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Shot Blast

Motone Points ACG Cover/Badge - Ribbed - Black/Polished Rib Contrast Finish

Motone Points ACG Cover/Badge - Ribbed - Shotblast

Inspired by the late great aftermarket company of the 1960s and 70s Webco, at Motone we have brought back the Finned motif for the Triumph Twins into the modern era with these high pressure precision die cast pieces.  This part is bolt on for your Modern Classic Triumph Motorcycle and fits in the upper right part of the stator cover - where traditionally on a vintage Triumph the Points would be.  On the modern bikes this is designated by the factory as the ACG cover or badge. Suitable for all the 2016 and up Triumph twins including but not limited to  Street Twin, Speed Twin, Street Cup, Street Scrambler, Scrambler 1200, Thruxton, Bobber, Speedmaster, T100 and the T120 

Motone Clutch Badge - Ribbed - Black Polished Rib Contrast Finish

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Black and Contrast Polished

Motone TPS Carb/Throttle Body Cover - Pair - Ribbed/Finned - Black

Motone Finned Exhaust Clamps - LC - Black Paint Finish

Version 2.0 - Investment Cast Stainless Steel  Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in BLACK finish Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200  These fit 2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120, Speed Twin 900, Scrambler 900

Motone Points ACG Cover/Badge - Ribbed - Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - this Finned ACG Cover (in what on the 1960s Triumphs would have been a Points cover) inspired largely by the works of Webco and other late great aftermarket Triumph customisers from the last century.   Unlike the sandcast Webco covers however the Motone ones are precision pressure cast using modern tech.  Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics

Motone Finned Exhaust Clamps - LC - Shot Blast Finish

New - Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Shot Blast finish  Now available here in strong investment cast Stainless Steel  Inspired by the Webco finned cooling parts of the 1960s and 70s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton and Speed Twin 1200 because of the extra cross over pipe in the stock thruxton headers.   Specifically design to fit  2016 and UP : Speed Twin 900, Street Twin, Street Cup, Street Scrambler, Scrambler 900, Speedmaster, Bobber, Bobber Black, T100, T120, Scrambler 1200 Fitting notes : Note - Anyone can fit these clamps at home - 5 minutes Due to the OEM factory design of the clamp assembly the nuts should be tightened sequentially - do not torque up one nut all the way before moving to the other but rather half a turn on each nut. The Clamps themselves like the original Clamps are delivered in 4 pieces - these are marked UR, LR, UL, LL - Meaning Upper Right, Lower Right, Upper Left, Lower Left. After removing the original clamps from the bike assemble the new pair of clamps (either UR/LR for right header, or UL/LL for left header) around the part of the straight part header pipe before it starts to bend.  Be sure to check the two clamp pieces are fully interconnected together around both sides of the header.  

Motone Points ACG Cover/Badge - Union Jack - Black

Motone Clutch Badge - Ribbed - Black

Ribbed Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now. Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint.  We took inspiration from the 1960s US Triumph tuning company Webco (who in turn were inspired by Mangus and others before them) to create this new range of finned engine parts.  Unlike the vintage Triumph-aftermarket companies who generally employed a low grade kind of sandcasting at Motone we employ only high spec precision high pressure die casting - this means we can control the perfect size of our product every time and dont have to worry about porousity and shrinkage and things like that which you would when doing sand cast.  Thats how come Motone die cast parts are the best out there.  Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Clutch Badge - Union Jack - Black

Union Jack Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now. Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint.  Precision fit part - Bolt on - Fit at home  Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Clutch Badge - Union Jack - Polish

Motone Points ACG Cover/Badge - Ribbed - Polish

Motone Clutch Badge - Ribbed - Polish

Motone Points ACG Cover/Badge - Union Jack - Polish

High Pressure Diecast Aluminium and Mirror Polished 

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)

Motone Up-And-Over Riser Kit for One Inch Bars - Black

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars. We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position.  This is about as far as you can take the stock bars without having to install longer cables. Easy to fit at home with basic tools.  Fits : T100 (all years aircooled and liquid cooled), T120, Speedmaster (air and liquid cooled models), Bobber, Thruxton EFI, America  

Motone Gear Shifter Lever End Peg - Ribbed - Brass

Ribbed foot peg as pictured in BRASS  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle. Please note this item wont work on the Thruxton as the peg is not removable 

Motone TPS Carb/Throttle Body Cover - Pair - Union Jack - Polish

Motone Indicator/Turn Signal Brackets - for LC Triumphs - 10mm

Motone Mirror Delete Plugs (One Inch Bars) LC T100/T120/Bobber

Motone Triumph Turn Signal/Indicator Wiring Adapter (for Liquid Cooled Bonnies 2016 to 2025)

Motone Monza Cap Kit for Triumph and HD

 

Motone Custom Fuel Gas Cap - Billet Aluminium - Spun Satin Finish

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Polished

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Black

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone Dual Micro Switch Button Housing - One Inch Handlebar - Black

 

Motone Custom Billet Indicator Turn Signals - Pair - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Black

Motone Classic Cafe Racer custom Knee Pads - Black Pinstripe

   

Motone Fuel/Gas/Petrol Tank Custom Knee Pads - Union Jack

This sale is for a set of two seat custom rubber knee pads for your Triumph Twin (or other motorcycle) as pictured . In Black.Design :  Union Jack Black - Manufactured using a blended vulcanized natural rubber to produce a high quality weather resistant compound. Adhesive : 468MP Automotive 3M - selected for its strength and resistance to all weather elements plus gasoline.BUILT TO LAST  As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.   

Motone Gear Shifter Lever End Peg - Ribbed - Black

Custom CNC turned out of aviation grade billet 6061t aluminium. This sale is for the Ribbed foot peg as pictured in Black.  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle.

Motone Gear Shifter Lever End Peg - Ribbed - Aluminium

 

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Black

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap. Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars. Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Polish

Billet Disc Brake Oil Reservoir Master Cylinder Cap - Motone Logo - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Polish

Motone Custom Fuel Gas Cap - Billet Aluminium - Black

Motone Custom Fuel Gas Cap - Billet Aluminium - Polished

Motone Custom Fuel Gas Cap - Billet Brass and Aluminium

Motone Custom Fuel Gas Cap - Billet Aluminium - Rippled

Motone Infinity Gas Cap - Brass Rippled Top - Aluminium Thread - Rippled

Motone Slingshot Custom Headlight Brackets 41mm - Black