Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets - POLISHED

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR   -  THIS VERSION IN POLISHED FINISH Built out of High Pressure Die Cast Aluminium these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone Wrap-Around Fork M8 Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR  Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Giger - Short Reach Headlight Brackets 41mm - Black

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Black

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Brushed

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Polish

 

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Polished

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone Lucas Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON 2001-2015 ONLY  (including both CARB and EFI bikes variants)

Motone Miller Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015 Present - Fits both CARB and EFI bikes.

Motone Front Indicator/Turn Signal Relocation Bracket - Silver

 

Motone Front Indicator/Turn Signal Relocation Bracket - BLACK

 

Motone LHS Ignition Relocation Bracket - BLACK

 

Motone RHS Ignition Relocation Bracket - BLACK

 

Motone Bates Style Bottom Mount Headlight Bracket - Black

Custom CNC milled from aviation grade billet 6061t aluminium. This sale is for a bottom mount headlight bracket as pictured IN BLACK. Includes bolts as pictured. Allows you to fit a bates style or any other bottom mount headlight to your bonnie without any drilling. We made this version with a slotted vertical hole, allowing precise adjustable fitment of the headlight on the vertical axis so you can properly line it up with the tank and the lines on the rest of the bike. Headlight mount slotted hole is machined to take a bates light with 10mm thread. Bracket mounts in place of where the stock regulator sits so no drilling required to fit. Regulator also needs to be relocated to the frame rails or elsewhere - we also make a bracket for this. For those wanting to use the part for a custom application (non-triumph) the distance between the 2 slotted horizontal bolt holes centre to centre is 85mm (3.34 inches) Bracket Suitable for use with all the air cooled Triumph Twins 2001-2015 so T100, Bonneville, Scrambler, Thruxton, Mag Wheel SE etc. The bracket also works some of the liquid cooled Twins ie the new T100, T120, Street Twin. Street Cup, Street Scrambler.     

Motone Regulator/Rectifier Frame Rail Relocation Bracket

 

Motone Indicator Brackets - Top Shock Mount - Polished

 

Motone Indicator/Turn Signal Brackets - Top Shock Mount - Black

 

Motone Indicator Brackets - Under Seat Mount - Polish

 

Motone Indicator Brackets - Under Seat Mount - Black

 

Motone Slingshot Custom Headlight Brackets 41mm - Black