Motone Triumph OE Indicator Turn Signal Plug Wiring Adapter OE to 3.9mm Universal Bullet

Motone Rear Wiring Loom - Plug and Play - Bobber/Scrambler 1200/Speed Master

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc without having to chop into the stock loom This Loom our part code DDM016 fits    All Years Triumph Bobber  All Years Speedmaster 1200 All Years Scrambler 1200    Note that his loom contains a resistor to stop the issue causing engine warning light when fitting aftermarket Tail lights.   Wired as Follows Orange - R - is RHS Indicator Brown - L - is LHS Indicator As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (on on each side)  There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.  And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth.  Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts...    ORANGE (Single Bullet) - Right Indicator BROWN (Single Bullet) - Left Indicator GREEN (Single Bullet) - Aux / Spare / License Plate Illumination (if required as seperate)   YELLOW (Double Bullets) - Running Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights) RED (Double Bullets) - Brake Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights)   BLACK - Earths/Neutral 

Motone Ignition Relocation Wiring Loom - Plug and Play - LC

The idea behind this wiring loom adapter is so you can more Ignition Barrel from its stock position (usually on the top yoke depending on the bike) to elsewhere on the frame  This is ideal if you have a custom yoke setup (we are working on those too)  For now the wiring loom is available here first for those that have their own custom yokes already etc - as of today we also have the barrel bracket ready to relocate to the sprocket cover and soon we will also have custom yokes too 

Motone Triumph Turn Signal/Indicator Wiring Adapter (for Liquid Cooled Bonnies 2016 to 2025)