Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone CYLON LED Taillight CE Street Legal Running & Brake Light

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black/Contrast Polished

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone TITAN BOLTS Billet GR5 Titanium Brake Rotor Bolts - BLACK - Aircooled - 10 Piece Set

Part of our Titanium Series of Components this is a set of GR5 Titanium precision machined billet Brake Rotor Bolts for your 2001-2015 Triumph Bonneville. ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Full set of 10 pieces to fit both the Front and Rear Rotors on your bike.  Available here in PVD BLACK BOLT SPEC : M8x1.25x30   

Motone TITAN BOLTS Billet GR5 Titanium Brake Rotor Bolts - Natural Finish - Aircooled - 10 Piece Set

Part of our Titanium Series of Components this is a set of GR5 Titanium precision machined billet Brake Rotor Bolts for your 2001-2015 Triumph Bonneville. ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Full set of 10 pieces to fit both the Front and Rear Rotors on your bike.  Available here in Natural Titanium Finish BOLT SPEC : M8x1.25x30   

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - BRASS

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone Bar End Mirror Adapter Kit - 2001-2015 T100/Aircooled - PAIR

These BAR END Adapter Brackets are designed for your aircool (2001-2015) Triumph Bonneville T100 (or Thruxton or bike of that era with One Inch bars)  Inside the original Triumph bars is a female thread which these adapters screw right into (Screws included in the kit) meaning that you can then fit Bar End Mirrors - such as the ones we make - of course if by some temporary lapse of judgement you have some other brand bar end mirrors they will work too (although did you know ours are better)  SOLD IN PAIRS (2 pcs) Please note that if you no longer have the original bars but have some generic hollow ones with no thread inside we also make some adapters that will fit them too which we call the Exacta Mounts which are available here

Motone PIKE Brake and Clutch Lever Set - Triumph - Adjustable - Billet Aluminium Black

These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK TYPE R - REGULAR FIT (FOR MOST TRIUMPH TWINS) Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand After seeing all the cheap dangerous tat out there, as well as the gaudy colours that have ,we feel little place on a modern classic motorcycle we designed the PIKE levers to offer the best of both worlds in terms of style, quality and customisation. The PIKE levers fit MOST modern classic Triumph Twins from 2004 to the modern day The exception to this are the bikes with the Brembo master cylinders (TFC Bikes, Speed Twin 1200, Scrambler 1200 XC, Thruxton R/RS) - for these see Type B  AND SPEED TWIN 900 2025 ON PLUS SCRAMBLER 900 2026 ON - THESE NEED TYPE C (currently in development)   PIKE LEVERS TYPE R FIT ALL NEARLY ALL TRIUMPH TWINS (790cc and up) 2004 - NOW T100 & T120 - All Variants (Carb, EFI, Liquid cooled etc) 2004-  2025 TRIUMPH SCRAMBLER 900 (carb, efi, STREET SCRAMBLER, SCRAMBLER 900) 2016 - NOW TRIUMPH BOBBER / SPEED MASTER (all variants including America, all 900-1200cc etc)  2016 - 2024 STREET TWIN / STREET CUP / SPEED TWIN 900 2004 - 2015 THRUXTON (900cc variants)   

Motone PARABOLA Engine Oil Filler Cap - Dished - BRASS

Motone ICON LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone PARABOLA Engine Oil Filler Cap - Dished - Black

Motone Ballista hot forged CHROMED vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel) These are Sold as a Pair and available here in CHROME finish  

Motone ICON MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone PICO MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone XL Plug and Play Wiring Harness Adapter - for Side Mount License Plate Air cool 2001-2015

Motone PICO LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - BLACK

 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Talon - Ribbed Clutch Lifter Cover - BRASS

Ribbed Clutch Lifter Cover, Hot Forged Solid Brass! Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - AC - Contrast Polish/Black

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles - this version is powder coated Black which we then mask and then mirror polish the top face for a contrast finish  2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU569 (or variant) instead  

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - AC - Spun Metal Finish

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles 2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU561 instead  

Motone Tailored Bike Protector/Workshop Cover - Bonneville/T120/T100/Street Twin/Enfield

Tailored to protect your Pride and Joy - Double Layered - Double Stitched - UV proof outer, silky inner to protect paint work against scratches  For use inside Garage/House/Kitchen/Workshop   Tested to fit on :  Bonneville T100 / T120 / Street Twin / Speed Twin / Thruxton / Street Scrambler  Royal Enfield Interceptor / Continental GT      

Motone The Capos - Fork Top Caps Pair - Early - Titanium

The Capos - Machined out of Biller GR5 Titanium Alloy to compliment "The Godfather" Titanium Yoke Nuts  Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-Present T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU54 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU563

Motone Finned Carb Tops Contrast Cut Black - CARB VERSION

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed

Motone Morningstars XL - Titanium Hero Blobs / Peg Scrapers / Lean Feelers XL / AC

Machined out of GR5 Billet Titanium  THESE ARE THE XL ONES - STOCK LENGTH ON AIR COOLED BIKES (2001-2015) BUT EXTRA LONG ON LIQUID COOLED (2016-NOW) - SO IF YOU FIT THIS VERSION TO LC BIKE - MORE SAFETY SPARKS GUARENTEED   These peg scrapers will help let you and any friends behind you, discover an appropriate safe riding angle. Version B - these are suitable for all the Triumph Twins however on some models like the Bobber and Speedmaster which have fairly low pegs we recommend version A.

Motone Stainless Steel - Engine Crash Bar Kit - Black

Bent out of 25mm o/d 300 Series Stainless Steel and Powder Coated Black Supplied with Bolt fixing  These Crashbars are designed to fit on the frame of all the Aircooled Bonnevilles from 2001-2015 such as the T100, the Bonneville, the Thruxton 900 etc. They also fit the AMERICA and the SPEEDMASTER models for the same era both carb and EFI variants  Please note the regulator needs to be located in original position on the bike to fit these guards If you have fit Ignition Relocation Bracket its still possible to relocate to the side of the frame but you will need some extended bolts for them to be compatible with these guards.   Other than that good to go on all models. Note we made these out of high quality 300 series Stainless Steel - beware cheap imitations - also available in mirror polished finish Note Whilst they will fit the Scrambler Frame they cannot be run in conjunction with the Scrambler High Pipes

Motone Stainless Steel - Engine Crash Bar Kit

Bent out of 25mm o/d 300 Series Stainless Steel and Mirror Polished  These Crashbars are designed to fit on the frame of all the Aircooled Bonnevilles from 2001-2015 such as the T100, the Bonneville, the Thruxton 900 etc.    They also fit the AMERICA (carb or EFI) and the SPEEDMASTER (carb or EFI) Please note the regulator needs to be located in original position on the bike to fit these guards If you have fit Ignition Relocation Bracket its still possible to relocate to the side of the frame but you will need some extended bolts for them to be compatible with these guards.   Other than that good to go on all models. Note we made these out of 300 series Stainless Steel which has high chromium content yet will not rust like the mass produced mild steel bars that have been chromed.  Also available in a Black powder coat version. Please note Whilst they will fit the Scrambler Frame they cannot be run in conjunction with the Scrambler High Pipes

Motone Engine Oil Filler Cap - Roswell - Solid Black

Motone Finned Carb Tops Contrast Cut 8 Balls Black - CARB Version

Top Quality custom CNC milled from aviation grade billet 6061t aluminum. This sale is for pair Carb tops pictured in 8 Ball Design we do a version for the later EFI bikes as well, this one is for the carb bikes Totally bolt-on part Fits 2001-2007 CARB Triumph Bonneville, T100, Scrambler, Thruxton, America and Speedmaster 

Motone The Guvnors - Fork Top Caps Pair - Early - Brass

Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-2018 T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU516 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU514

Motone Finned 2001-2007 CARB Tops Contrast Cut Brass

Motone Talon - Ribbed Clutch Lifter Cover - Black

Ribbed Clutch Lifter Cover, Finished in Black Attaches to the lifter using a pair of stainless grub screws - allen key supplied Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone Talon - Ribbed Clutch Lifter Cover - Black with Polished Ribs

Ribbed Clutch Lifter Cover, Finished in Black with the fins Contrast Polished! Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone Speedster Sprocket Cover - Ribbed - Black with Contrast Polished Fins - AC

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone CHOPSAW Engine Oil Filler Cap - Shot Blast - Frosty

Motone CHOPSAW Engine Oil Filler Cap - Hard Black - Stealth

Motone Solid Brass Monza Cap Kit - Limited Run

 

Motone Finned EFI Carb Tops Contrast Cut Brass

Motone Finned EFI Carb Tops Polished

Motone The Capstan! Luggage/Strap Attachment Spool - Brass

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Contrast Polish

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black Contrast Polished

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Domed

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Black

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Ballista hot forged brass vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel These are Sold as a Pair and available here in brass finish  

Motone Copper Exhaust Ring Gaskets - AC

Suitable for use on all Air Cooled Triumph Bonneville Motors 2001-2015   Triumph Bonneville Triumph Bonneville T100 Triumph Scrambler Triumph Thruxton  

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone "THE BOSS" MK.II Top Yoke / Steering Stem BRASS Nut - AC

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles 2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU068 instead  

Motone Engine Oil Filler Cap - Roswell - Brass

Motone Knurled Choke Knob - Brass

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Polished

Classic style parcel rack. A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel and mirror polished Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany      Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Black

The Aero A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel finished in black powder coat. Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany.   Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone H4 Headlight Extension Cable

Motone Monza Cap Kit for Triumph and HD - Black

 

Motone Monza Cap Kit for Triumph and HD - Black/Contrast Polished

 

Motone Classic Leather Key Fob

Handmade by skilled craftsmen from extra thick, high quality Top Grain Cowhide Leather.  Tanned and oiled using traditional processes that will in time produce a vintage worn-in patina. Hand stitched border with burnished edges framing the embossed Motone legend. The perfect way to keep you keys safe and complement the look and style of your modern classic or custom build.   This is first in a range of stylish hard wearing leather goods from Motone Customs.   Built to Last long lasting weather resistant finish

Motone Monza Cap Kit for Triumph and HD - Brushed Finish

 

Motone Up-And-Over Riser Kit for One Inch Bars - Black

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars. We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position.  This is about as far as you can take the stock bars without having to install longer cables. Easy to fit at home with basic tools.  Fits : T100 (all years aircooled and liquid cooled), T120, Speedmaster (air and liquid cooled models), Bobber, Thruxton EFI, America  

Motone Gear Shifter Lever End Peg - Ribbed - Brass

Ribbed foot peg as pictured in BRASS  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle. Please note this item wont work on the Thruxton as the peg is not removable 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Black

 

Motone Speedster Sprocket Cover - Ribbed - Polished - AC

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Brushed

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Polish

 

Motone Speedster Sprocket Cover - Ribbed - Brushed - AC

Motone H4 Headlight Module - Battery Saver / Safe Start

Motone Triumph Turn Signal Wiring Adapter (for Air Cooled Bonnies 2001-2016)

Motone Speedster Sprocket Cover - Ribbed - Black - AC

Motone Monza Cap Kit for Triumph and HD

 

Motone Custom Fuel Gas Cap - Billet Aluminium - Spun Satin Finish

Motone Rippled EFI Carb Tops Polish

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Black

Motone Dual Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Dual Micro Switch Button Housing - One Inch Handlebar - Black

 

Motone Custom Billet Indicator Turn Signals - Pair - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Black

Motone Classic Cafe Racer custom Knee Pads - Black Pinstripe

   

Motone Fuel/Gas/Petrol Tank Custom Knee Pads - Union Jack

This sale is for a set of two seat custom rubber knee pads for your Triumph Twin (or other motorcycle) as pictured . In Black.Design :  Union Jack Black - Manufactured using a blended vulcanized natural rubber to produce a high quality weather resistant compound. Adhesive : 468MP Automotive 3M - selected for its strength and resistance to all weather elements plus gasoline.BUILT TO LAST  As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.   

Motone Gear Shifter Lever End Peg - Ribbed - Aluminium

 

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Black

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap. Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars. Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Polish

Billet Disc Brake Oil Reservoir Master Cylinder Cap - Motone Logo - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Polish

Motone Indicator Brackets - Top Shock Mount - Polished

 

Motone Indicator/Turn Signal Brackets - Top Shock Mount - Black

 

Motone The Capstan! Luggage/Strap Attachment Spool - Aluminium

Motone Knurled Choke Knob - Black

Motone Custom Fuel Gas Cap - Billet Aluminium - Black

Motone Custom Fuel Gas Cap - Billet Aluminium - Polished

Motone Custom Fuel Gas Cap - Billet Brass and Aluminium

Motone Custom Fuel Gas Cap - Billet Aluminium - Rippled

Motone Infinity Gas Cap - Brass Rippled Top - Aluminium Thread - Rippled

Motone Finned EFI Carb Tops Contrast Cut 8 Balls Black

Top Quality custom CNC milled from aviation grade billet 6061t aluminum. This sale is for pair of throttle body "carb" tops as pictured in 8 Ball Design Totally bolt-on part FITS ALL YEARS EFI HINKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2008-2015 Present - Fits all EFI bikes.

Motone Custom Sprocket Cover - Black

   

Motone Finned EFI Carb Tops Contrast Cut Black

Motone Plug and Play Wiring Harness Adapter - for rear Mudguard Mount Indicators