Motone BUZZSAW Speed Twin 1200 Brake Discs / Rotors (Full Set)

Motone's new Buzzsaw brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the drilled pattern helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA Speed Twin 1200 Brake Discs / Rotors (Full Set)

Motone's new Kanagawa brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA 255 Rear Brake Disc / Rotor

Motone's new Kanagawa rear brake disc is designed to improve your Triumph's braking performance (and looks). Built from stainless steel, it’s precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA 320 Front Brake Discs / Rotors (pair)

Motone's new Kanagawa floating front brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone BUZZSAW 255 Rear Brake Disc / Rotor

Motone's new Buzzsaw rear brake disc is designed to improve your Triumph's braking performance (and looks). Built from stainless steel, it’s precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the drilled pattern helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone BUZZSAW 320 Front Brake Discs / Rotors (pair)

Motone's new Buzzsaw floating front brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the drilled pattern helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone KANAGAWA Scrambler 1200 Brake Discs / Rotors (Full Set)

Motone's new Kanagawa brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the rippled design helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone BUZZSAW Scrambler 1200 Brake Discs / Rotors (Full Set)

Motone's new Buzzsaw brake discs are designed to improve your Triumph's braking performance (and looks). With an all-stainless-steel construction, they're precision-machined for a perfect fit and heat-treated for durability. An anti-corrosion coating keeps the elements at bay, while the drilled pattern helps dissipate heat and shed debris. The result: reduced brake fade, consistent braking in all conditions, and a bike that looks at least ten times gnarlier.

Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone CYLON LED Taillight CE Street Legal Running & Brake Light

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone TITAN BOLTS Titanium Brake Rotor Bolts - x14 pcs - BLACK Finish LC - Full Set (Dual Front Disc+Rear Disc)

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and  single rotor rear)  2016-to-today Triumph Twin Available here in BLACK BOLT SPEC : M81.25x30 Also available in natural, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

Motone TITAN BOLTS Titanium Brake Rotor Bolts - x14 pcs - Natural Finish LC - Full Set (Dual Front Disc+Rear Disc)

Part of our Titanium series - each bolt is individually precision machined out of billet GR5 Grade Titanium ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Available here in a set of 14 Bolts - so thats enough for your full Bike (dual front and  single rotor rear)  2016-to-today Triumph Twin Available here in Natural Titanium finish BOLT SPEC : M81.25x30 Also available in PVD Black, as well as sets of 9 for single front disc twins and also available in a different spec for the older aircooled bikes

Motone TWISTER Clutch Cable Adjuster - BRASS - M8x1.25x18

Part of our BRASS  range of components. This is the TWISTER - BRASSY edition Precision machined out of Billet  C36000 Brass - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - BLACK - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up.  Finished here in Physical Vapour Deposition BLACK Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - Natural Finish - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone Billet Radiator Guard Kit - Union Jack - Black SCRAMBLER 1200 Version

Special Versions only for the Triumph Scrambler 1200 (all variants X, XE, XC ETC)  Motone Rad Guard for all Liquid Cooled Triumph Twins. Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black. Rear grill is laser cut out of steel and finished in a black powder coat.   Full assembly comes ready to fit to your bike as a complete kit.   

Motone The Claw - Rear Number Plate Hanger - Triumph LC - Horizontal Plate

This is the CLAW Fits using the rear axle adjuster mount point - coupled with bent steel bars which have the number plate hanger aligned in the centre of rear wheel.   It comes with a laser cut plate for the number plate as well as our billet e-marked (lab tested street legal) PILLBOX LED Plate illumination light.   This has a 120cm of cable and terminates into Japanese spec 3.9mm Bullets.   The CLAW fits on any Triumph Twin from 2016 to now - we also make plug and play wiring loom adapters for all this bikes depending on which model you have   DDM021 #mce_temp_url#[Street Twin, Speed Twin 900, Street Scrambler, Scrambler 900, T100 LC, T120, Speed Twin 1200 EUR4 Only (rwu fork)] DDM016 [Bobber, Speedmaster, Scrambler 1200] DDM017 [Speed Twin 1200 - EUR5 onwards]      

Motone SIDEKICK SLIM (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)(US SPEC VERTICAL PLATE)

Fits any LC 2016 and up Triumph Twin  SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates  We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Motone PIKE Brake and Clutch Lever Set - BREMBO ONLY VERSION - TYPE B

BREMBO VERSION - Only for Bikes with BREMBO Master Cylinder (with single point of adjustment) : SPEED TWIN 1200, SCRAMBLER XC, THRUXTON R/RS/FE  ONLY  These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand After seeing all the cheap dangerous tat out there, as well as the gaudy colours that have ,we feel little place on a modern classic motorcycle we designed the PIKE levers to offer the best of both worlds in terms of style, quality and customisation. If you have any other Model Triumph Twin please see the Type R (Regular) version here     

Motone PARABOLA Engine Oil Filler Cap - Dished - BRASS

Motone ICON LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone PARABOLA Engine Oil Filler Cap - Dished - Black

Motone Scrambler 1200 Light Bracket - Gloss Black

Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit we also sell in combo kit forms  High Pressure Die Cast Aluminium - GLOSS BLACK - To be Combined with any of the following Lights ELDORADO  BEL-AIR LECTER CUDA BIG FIN   For the SCRAMBLER 1200 we also make a plug and play wiring loom adapter DDM016 available HERE

Motone Scrambler 1200 Light Bracket - Polish

Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit we also sell in combo kit forms  High Pressure Die Cast Aluminium - Mirror Polished - To be Combined with any of the following Lights ELDORADO  BEL-AIR LECTER CUDA BIG FIN   For the SCRAMBLER 1200 we also make a plug and play wiring loom adapter DDM016 available HERE

Motone Ballista hot forged CHROMED vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel) These are Sold as a Pair and available here in CHROME finish  

Motone Triumph Engine Temp Gauge Oil Filler Cap - °C - Celsius

Motone Triumph Engine Temp Gauge Oil Filler Cap - °F - Fahrenheit

Motone ICON MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone Sidekick (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)

Fits all 2016 and UP Triumph Twins (Especially BOBBER/SPEEDMASTER/T120/T100LC/SPEED TWIN etc) We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU604) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Points ACG Cover/Badge - MOTONE Logo - Polish/Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - Contrast Polished with the MOTONE logo on outside face Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics 

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone PICO MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone Casablanka -Passenger Peg Delete / Blanking Plates / Forged Edition

Points ACG Cover/Badge - MOTONE Logo - Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - with the MOTONE logo on outside face Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics

Motone PICO LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone Points ACG Cover/Badge - Union Jack - 2 Tone Brass & Black

SOLID BRASS ENGINE BADGE - 2 Tone - BLACK and BRASS  Krackle Black and Polished Brass This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone Clutch (LHS)Cover/Badge - Union Jack - 2 Tone Brass & Black

SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face  This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike) Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone Microblade Aluminium Screen Gloss Black

Drawn out of sheet 5052 Aluminium and then GLOSS BLACK finished  So far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200, Scrambler 1200  

Motone Points ACG Cover/Badge - Union Jack - Solid Brass

SOLID BRASS ENGINE BADGE This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - BLACK

 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Shock Mount Indicator Brackets V2 - Work with all Indicators

New Shock mount 2.0 Indicator brackets will work on many different types makes and models of bikes with capability to mount any  Pretty much Any known Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Can be fit on outside or inside of Shock depending on the type of shock you have - Includes blanking plates if not using the OEM holes.   Each bracket can be fit on either side of the bike  Made out of Stainless Steel and Powder Coated in Black

Motone Rear Wiring Loom - Plug and Play - Bobber/Scrambler 1200/Speed Master

Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc without having to chop into the stock loom This Loom our part code DDM016 fits    All Years Triumph Bobber  All Years Speedmaster 1200 All Years Scrambler 1200    Note that his loom contains a resistor to stop the issue causing engine warning light when fitting aftermarket Tail lights.   Wired as Follows Orange - R - is RHS Indicator Brown - L - is LHS Indicator As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (on on each side)  There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.  And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth.  Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts...    ORANGE (Single Bullet) - Right Indicator BROWN (Single Bullet) - Left Indicator GREEN (Single Bullet) - Aux / Spare / License Plate Illumination (if required as seperate)   YELLOW (Double Bullets) - Running Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights) RED (Double Bullets) - Brake Lights (Use One with Central Tail Light, or use Both if running 3in1 Lights)   BLACK - Earths/Neutral 

Motone Clutch Badge - Union Jack - Solid Brass

Motone Quality - Hot Forged in Solid Brass  Union Flag Motif  Bolt on for your Triumph Twin - Fits all the Twins 2016 and up (Street Twin, Speed Twin, Street Cup, Scrambler 1200, Bobber, Speedmaster, etc)  

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - LC - Contrast Polished

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  Finished in Wringle Powder Coat Black which we then mask and then mirror polish the top outer face in our signature style Fits all 2016 to Now Triumph Twins including Street Twin / Street Cup / Street Scrambler / T100 LC / T120 / Scrambler 1200 / Bobber / Speedmaster 1200 / Thruxton 1200 / Speed Twin 

Motone The Gaffer - Rear Axle Nut - Titanium - Contrast Polished

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy  Finished in Wrinkle Coat Black - With Mirror Polished Top Face 

Motone Forged Aluminium Chain Adjuster Block Kit - BLACK

Forged in Aluminium and Powder Coated Black with a Polished Washer Plate Suitable for use on all the liquid cooled Twins including  Street Twin  Street Scrambler  Street Cup Bobber T100 T120 Thruxton 1200/R/RS Scrambler 1200 Speedmaster  Speed Twin  

Motone Ignition Relocation Wiring Loom - Plug and Play - LC

The idea behind this wiring loom adapter is so you can more Ignition Barrel from its stock position (usually on the top yoke depending on the bike) to elsewhere on the frame  This is ideal if you have a custom yoke setup (we are working on those too)  For now the wiring loom is available here first for those that have their own custom yokes already etc - as of today we also have the barrel bracket ready to relocate to the sprocket cover and soon we will also have custom yokes too 

Motone The Gaffer - Rear Axle Nut - Titanium - BLACK

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy  Finished in Wrinkle Coat Black

Motone The Gaffer - Rear Axle Nut - Titanium - Spun Finish

Rear Axle Nut - Suitable for all the 2016 to Now Triumph Twins - Machined out of Billet GR5 Titanium Alloy   

Motone Points ACG Cover/Badge - Ribbed - Solid Brass

Motone Quality - SOLID BRASS ENGINE BADGE This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs)  - The smaller of the two round engine covers.  Clutch Side Badges/Covers are also available.  Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today Street Twin Street Cup Street Scrambler Scrambler 1200 Bonneville Bobber T100  T120 Thruxton Speedmaster Speed Twin

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - LC - Spun Metal Finish

Machined out of GR5 Titanium Billet Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut - this is the Godfather, matching style fork top caps are coming soon known as the Capo's  Available here in Spun Metal Finish - we also have black and contrast versions in the works   Street Twin Speed Twin Street Scrambler Street Cup Bobber Thruxton 1200 Scrambler 1200 T100 T120 Speedmaster 1200   Please note if you have a 2001-2015 Bonnie another Size Yoke is in the works  

Motone Morningstars XL - Titanium Hero Blobs / Peg Scrapers / Lean Feelers XL / AC

Machined out of GR5 Billet Titanium  THESE ARE THE XL ONES - STOCK LENGTH ON AIR COOLED BIKES (2001-2015) BUT EXTRA LONG ON LIQUID COOLED (2016-NOW) - SO IF YOU FIT THIS VERSION TO LC BIKE - MORE SAFETY SPARKS GUARENTEED   These peg scrapers will help let you and any friends behind you, discover an appropriate safe riding angle. Version B - these are suitable for all the Triumph Twins however on some models like the Bobber and Speedmaster which have fairly low pegs we recommend version A.

Motone Stealth Exhaust Clamps - Black

Investment Cast SS304 // BLACK Sold as Pair Exhaust Clamps to suit all the liquid cooled Triumph Twins 2016 to Now Street Twin / Street Cup / Street Scrambler / Thruxton / Speed Twin / Bobber / Speedmaster / Scrambler 1200 / T100 / T120

Motone Engine Oil Filler Cap - Roswell - Solid Black

Motone Stealth Exhaust Clamps - Stainless

Investment Cast SS304 Polished  Exhaust Clamps to suit all the liquid cooled Triumph Twins 2016 to Now Street Twin / Street Cup / Street Scrambler / Thruxton / Speed Twin / Bobber / Speedmaster / Scrambler 1200 / T100 / T120

Motone Stainless Franken Bobbins - Paddock Stand Fixing Kit

Stainless Steel Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster Franken Bobbins  They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long  The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt Includes :  Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200,  Triumph Speed Twin 1200, Royal Enfield Interceptor ,  Triumph Speed Triple, Street Triple 

Motone Black Cylinder Stud Knuckles Caps

Cold Forged out of Aluminum Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup. Supplied here in Stealth Black  

Motone Polished Cylinder Stud Knuckles Caps

Cold Forged out of Aluminum Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup.  

Motone Magnum Force - Brass Exhaust Clamp Nuts

Magnum Force Forged Brass Exhaust Clamp Stud Nuts Set Of 4 - Hot Forged Individually out of solid Brass  Will fit all the 2001 to Now Triumph Twins Street Twin / Street Cup / Street Scrambler / Scrambler 1200 / Thruxton / Speed Twin / Bobber / T100 / T120 / SE / Scrambler 900 / Speed Twin 900 etc etc

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone CHOPSAW Engine Oil Filler Cap - Shot Blast - Frosty

Motone CHOPSAW Engine Oil Filler Cap - Hard Black - Stealth

Motone Solid Brass Monza Cap Kit - Limited Run

 

Motone Microblade Aluminium Screen Mirror Polish Finish

Drawn out of sheet 5052 Aluminium and then mirror polished by hand New product so far known to fit - T100,  T120  all years  Also Adaptable for various other bikes including Yamaha XSR, Scrambler 1200 etc     

Motone Ballista hot forged brass vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel These are Sold as a Pair and available here in brass finish  

Motone Helmet Lock 2.0 Kit - For Liquid Cooled Bonneville

This is the latest version of our popular helmet lock previously available for the air cooled bikes. This new version is compatible with the Liquid cooled bikes and can be fitted either on the Left or Right side of the bike (so its possible to purchase 2 of the kits to fit one on either side of the bike). Designed to fit and tested on the Street Twin, Street Cup, Street Scrambler, T100, T120, Thruxton R, Thruxton, Speed Twin Can be fit at the same time as our pannier rails May also fit more models

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Brushed

Motone Brass Cylinder Stud Knuckles Caps

Cold Forged out of Brass Billets these are sold in sets of 4 and come supplied with grab nuts and an alan key to fix them onto the head of the cylinder stud bolts at the top of the cylinder. They fit all the Triumph Twins made from from 2016 to now including the T120, Bobber, Thruxton, T100, Speedmaster, Speed Twin, Street Twin, Street Scrambler, Scrambler 1200 and Street Cup. Although they will arrive shiny being made out of solid brass they start to really look good once a patina has developed after a few weeks of usage. 

Motone Clutch side engine casing bearing/Seal Kit LC

Refresh kit if you are replacing the clutch cover   T3600095 DUST SEAL. 12X18X4.5  T3800110 BEARING T3800156 BEARING,NEEDLE ROLLER,7X11X9  T3800001 BEARING,NEEDLE ROLLER,20X14X12  T3600088 SEAL,OIL,14X22X4.5

Motone Microblade Aluminium Screen Black Anodised Finish

Drawn out of sheet 5052 Aluminium and then Anodised BLACK New product so far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200 This page will be updated in due course as we test on new bikes, we will also cover your returns costs should you have a bike that isnt listed and are not sure if it fits - in that case send us a message or give us a call first.   We have a different version coming for Speed Twin and Street Twin 

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Polish

Motone Ribbed/Finned Clutch/Primary Side Engine Case Cover - Black

Motone "THE BOSS" Top Yoke / Steering Stem BRASS Nut - LC

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut    Street Twin (Speed Twin 900) Speed Twin  Street Scrambler (Scrambler 900) Street Cup Bobber Speedmaster Thruxton Scrambler 1200 T100 T120   Please note if you have a 2001-2015 Bonnie check out MMU069 instead  

Motone Engine Oil Filler Cap - Roswell - Brass

Motone Brass Franken Bobbins - Paddock Stand Fixing Kit

Brass Bobbins suitable for use on Triumph Bobber and Triumph Speedmaster Franken Bobbins  They come with a polished stainless boss as well as stainless M8 Bolts which are 50mm Long  The Franken Bobbins can also be used on most any bike that has facility to take a Bobbin supported by a M8 Bolt Includes :  Triumph Bobber, Triumph Speedmaster, Triumph Scrambler 1200, Triumph Thruxton 1200,  Triumph Speed Twin 1200, Royal Enfield Interceptor ,  Triumph Speed Triple, Street Triple 

Motone Vintage Hot Forged Brass Chain Adjuster Block Kit

To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit. Namely Hot Forged Brass.   To produce a truly individual product the chain adjusters are hand polished to reveal the facets of the forging process. Thick Grade 304 Stainless Boss also included Suitable for use on all the liquid cooled Twins including  Street Twin  Street Scrambler  Street Cup Bobber T100 T120 Thruxton 1200/R/RS Scrambler 1200 Speedmaster  Speed Twin  

Motone Monza Cap Kit for Triumph and HD - Black

 

Motone Monza Cap Kit for Triumph and HD - Black/Contrast Polished

 

Motone Finned Exhaust Clamps - LC - Black/Contrast Polished Fins

VERSION 2.0 - INVESTMENT CAST STAINLESS STEEL Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here finished in Black with Polished fin outer edges!  Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the stock headers on Thruxton 1200 /Speed Twin 1200 which have a link pipe at the exhaust port which gets in the way.   These fit 2016 and UP : Speed Twin 900, Street Twin, Street Cup, Street Scrambler, Scrambler 900, Speedmaster, Bobber, T100, T120    

Motone Clutch Side Engine Cover Gasket 900/1200 LC Twins

Suitable for all Triumph twins 2016 to now both 900 and 1200cc Engines  

Motone Alternator/Stator/Timing Cover Gasket 900/1200 LC Twins

Suitable for all Triumph twins 2016 to now both 900 and 1200cc Engines  

Motone Finned SS Exhaust Clamps - LC - Hand Polished Finish

Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Painstakingly Hand Polished finish Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200 (only the 1200 variant has the link pipe at the header which clash with the fins) These fit 2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120, Speed Twin 900, Scrambler 900 Version 2.0 formed out if investment cast STAINLESS STEEL  These are only available in limited numbers  HAND POLISHED IN STAINLESS STEEL - If you have ever tried to Polish something this shape in Stainless you may begin to appreciate the amount of time that has gone into getting these ready -  We are planning to get a small batch of these ready once every 6 months or so when we have time - these are not a mass market item - each fin is polished with various different grade polishing compound to end up with with the final finish in the traditional style and as such will Patina quickly.

Motone Monza Cap Kit for Triumph and HD - Brushed Finish

 

Motone Points ACG Cover/Badge - Ribbed - Black/Polished Rib Contrast Finish

Motone Points ACG Cover/Badge - Ribbed - Shotblast

Inspired by the late great aftermarket company of the 1960s and 70s Webco, at Motone we have brought back the Finned motif for the Triumph Twins into the modern era with these high pressure precision die cast pieces.  This part is bolt on for your Modern Classic Triumph Motorcycle and fits in the upper right part of the stator cover - where traditionally on a vintage Triumph the Points would be.  On the modern bikes this is designated by the factory as the ACG cover or badge. Suitable for all the 2016 and up Triumph twins including but not limited to  Street Twin, Speed Twin, Street Cup, Street Scrambler, Scrambler 1200, Thruxton, Bobber, Speedmaster, T100 and the T120 

Motone Clutch Badge - Ribbed - Black Polished Rib Contrast Finish

Motone Finned Exhaust Clamps - LC - Black Paint Finish

Version 2.0 - Investment Cast Stainless Steel  Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in BLACK finish Inspired by the Webco finned cooling parts of the 1970s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton/Speed Twin 1200  These fit 2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, T100, T120, Speed Twin 900, Scrambler 900

Motone Points ACG Cover/Badge - Ribbed - Black

Motone Quality - High Pressure Die Cast and Finished in Wrinkle Black - this Finned ACG Cover (in what on the 1960s Triumphs would have been a Points cover) inspired largely by the works of Webco and other late great aftermarket Triumph customisers from the last century.   Unlike the sandcast Webco covers however the Motone ones are precision pressure cast using modern tech.  Bolt on Part - Ready to Go - Suitable for all Triumph Modern Classics

Motone Finned Exhaust Clamps - LC - Shot Blast Finish

New - Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Shot Blast finish  Now available here in strong investment cast Stainless Steel  Inspired by the Webco finned cooling parts of the 1960s and 70s these are bolt on replacement for your stock clamps  These fit all the 900 and 1200 cc Triumph Twins except the Thruxton and Speed Twin 1200 because of the extra cross over pipe in the stock thruxton headers.   Specifically design to fit  2016 and UP : Speed Twin 900, Street Twin, Street Cup, Street Scrambler, Scrambler 900, Speedmaster, Bobber, Bobber Black, T100, T120, Scrambler 1200 Fitting notes : Note - Anyone can fit these clamps at home - 5 minutes Due to the OEM factory design of the clamp assembly the nuts should be tightened sequentially - do not torque up one nut all the way before moving to the other but rather half a turn on each nut. The Clamps themselves like the original Clamps are delivered in 4 pieces - these are marked UR, LR, UL, LL - Meaning Upper Right, Lower Right, Upper Left, Lower Left. After removing the original clamps from the bike assemble the new pair of clamps (either UR/LR for right header, or UL/LL for left header) around the part of the straight part header pipe before it starts to bend.  Be sure to check the two clamp pieces are fully interconnected together around both sides of the header.  

Motone Points ACG Cover/Badge - Union Jack - Black

Motone Clutch Badge - Ribbed - Black

Ribbed Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now. Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint.  We took inspiration from the 1960s US Triumph tuning company Webco (who in turn were inspired by Mangus and others before them) to create this new range of finned engine parts.  Unlike the vintage Triumph-aftermarket companies who generally employed a low grade kind of sandcasting at Motone we employ only high spec precision high pressure die casting - this means we can control the perfect size of our product every time and dont have to worry about porousity and shrinkage and things like that which you would when doing sand cast.  Thats how come Motone die cast parts are the best out there.  Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Clutch Badge - Union Jack - Black

Union Jack Clutch/Primary Side Engine Cover/Badge suitable for all the 900 and 1200cc Triumph Twins from 2016 to now. Motone Quality - High Pressure Precision Die Cast and finished in a wrinkle black to match the engine paint.  Precision fit part - Bolt on - Fit at home  Fits all the new twins : Street Twin, Street Cup, Street Scrambler, T100, T120, Scrambler 1200, Speed Twin, Bobber, Speedmaster

Motone Clutch Badge - Union Jack - Polish

Motone Points ACG Cover/Badge - Ribbed - Polish

Motone Clutch Badge - Ribbed - Polish

Motone Points ACG Cover/Badge - Union Jack - Polish

High Pressure Diecast Aluminium and Mirror Polished 

Motone Custom Fuel Gas Cap - Billet Aluminium - Spun Satin Finish

Motone Passenger Peg Delete / Blanking Plates / Stealth Version - No Exhaust Hanger

Motone Custom Fuel Gas Cap - Billet Brass and Aluminium

Motone Infinity Gas Cap - Brass Rippled Top - Aluminium Thread - Rippled