Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone Indicator/Turn Signal Brackets - Triumph 400 - REAR only - 8mm

Motone Indicator/Turn Signal Brackets - Triumph 400 - FRONT ONLY - 8mm

Motone Street Twin / Speed Twin 900 - Tail Light Adapter Bracket - For Stock Fender - Polish

Compatible with the Stock Fender/Mudguard allowing you to fit the Eldorado or other Motone Round light to the stock fender Polished Version Compatible with 2016-2024 Street Twin and Speed Twin 900 2016-2025 Street Scrambler and Scrambler 900 Not Compatible with Model Year 2025 and Up Speed Twin 900   

Motone Street Twin / Speed Twin 900 - Tail Light Adapter Bracket - For Stock Fender - Black

Compatible with the Stock Fender/Mudguard allowing you to fit the Eldorado or other Motone Round light to the stock fender Gloss Black Version Compatible with 2016-2024 Street Twin and Speed Twin 900 Compatible with 2016-2025 Street Scrambler and Scrambler 900 (Not Compatible with Model Year 2025 and Up Speed Twin 900)

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets - POLISHED

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR   -  THIS VERSION IN POLISHED FINISH Built out of High Pressure Die Cast Aluminium these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone SIDEKICK SLIM (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)(US SPEC VERTICAL PLATE)

Fits any LC 2016 and up Triumph Twin  SIDEKICK SLIM - This is the SLIM version for Vertical Orientation USA Spec License Plates  We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - POLISHED

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of the 3in1 Variation (Indicator, Brake, Running Lights) or the regular Turn Signal (T/S) only version though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - POLISHED  PLEASE NOTE: Does not work with new 2026 Bobbers

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - BRUSHED

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of the 3in1 Variation (Indicator, Brake, Running Lights) or the regular Turn Signal (T/S) version though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - BRUSHED to match stock seat  PLEASE NOTE: Does not work with new 2026 Bobbers

Motone LAMPREY - Under Seat Tail Light Mounts for OE Bobber Seat (use with 3in1 or T/S Lights) - BLACK

These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat They are designed to work with our PICO or ICON Tail lights of either the 3in1 Variation (Indicator, Brake, Running Lights) or the T/S (Turn Signal aka Indicator version) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread Sold as a Set of 2 pieces (1 Left and 1 Right sided piece) This version - BLACK PLEASE NOTE: Does not work with new 2026 Bobbers

Motone Triumph Bobber 47mm Smooth Spatz Fork Shrouds + Klingon Handlebar Mount Indicator Brackets

These are the SPATZ SMOOTH Fork Shrouds Bundled with Klingon HANDLEBAR MOUNT Indicator Brackets Custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end  The Klingons work with M8 Thread Indicators  HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit FITS 47mm Fork Bobber (and Bobber BLACK), and the the Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber) DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork   

Motone Triumph 400/1200 Wrap-Around Fork M8 (8mm) Indicator Turn Signal Bracket Clamps - Pair - 54mm Fork Dia - Black

Motone Triumph 400/1200 Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 54mm - Black

Motone Wrap-Around Fork M8 (8mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)

Motone Scrambler 1200 Light Bracket - Gloss Black

Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit we also sell in combo kit forms  High Pressure Die Cast Aluminium - GLOSS BLACK - To be Combined with any of the following Lights ELDORADO  BEL-AIR LECTER CUDA BIG FIN   For the SCRAMBLER 1200 we also make a plug and play wiring loom adapter DDM016 available HERE

Motone Scrambler 1200 Light Bracket - Polish

Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit we also sell in combo kit forms  High Pressure Die Cast Aluminium - Mirror Polished - To be Combined with any of the following Lights ELDORADO  BEL-AIR LECTER CUDA BIG FIN   For the SCRAMBLER 1200 we also make a plug and play wiring loom adapter DDM016 available HERE

Motone Wrap-Around Fork M8 Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone Sidekick (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)

Fits all 2016 and UP Triumph Twins (Especially BOBBER/SPEEDMASTER/T120/T100LC/SPEED TWIN etc) We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version Kits Consists of Axle Plate Bracket - Forged Stainless Steel (MMU607) Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU604) The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals  The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.  The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4  Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021 Or Speed Twin 1200 This one DDM017

Motone The SPATZ - 47mm Fork Shrouds Triumph Bobber/Speedmaster Integrated Indicator Mounts

These are the SPATZ  Our new custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end as well as including a set of mounts for any Indicator you might want to fit (and associate blanking plugs to make them neat whichever style you fit)  That means they will work with any M8 Indicator (like our PICO), or any M10 (Like our Billet), or the standard OEM Triumph (standard size or smaller ones) HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit   FITS 47mm Fork Bobber (and Bobber BLACK), and the the Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber) DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork   

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone Ignition Relocation Kit - Bracket + Loom

Ignition Relocation kit  Known to fit Street Twin Speed Twin 900 T100 LC T120  May fit more models we are testing soon and will update page Kit consists of a forged aluminium bracket that fits on top of the Sprocket Cover which allows you to relocate your ignition unit down from the yoke  It also includes a plug and play loom that replicates the plugs in the Ignition barrel to give you the flex to get it into the new position 

Motone Boomerang - Lower Yoke Indicator/Turn Signal Bracket - Street Twin/Speed Twin 900

This is our latest Indicator Bracket for the Triumph Twins We designed this bracket to use the holes in the lower yoke that are present on the Street Twin/Speed Twin 900 and other models since around 2019 when the regulator was relocated from the yoke to behind the rad position by the factory. This meant that the 2 vertical holes previously used for the regulator were filled in - fortunately the lower 2 holes - were left open. Purpose of these holes from the factory is uncertain but seems to be that the Street Scrambler / Scrambler 900 uses these to mount the headlight brackets.  For this reason we believe it should also be possible to fit this Boomerang bracket to the Scrambler 900 as well with some additional bolts however we have yet to test this.  The bracket may also fit other models - we will test and update. Bracket works with both 8mm and 10mm Indicators out of the box 

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR  Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Shock Mount Indicator Brackets V2 - Work with all Indicators

New Shock mount 2.0 Indicator brackets will work on many different types makes and models of bikes with capability to mount any  Pretty much Any known Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Can be fit on outside or inside of Shock depending on the type of shock you have - Includes blanking plates if not using the OEM holes.   Each bracket can be fit on either side of the bike  Made out of Stainless Steel and Powder Coated in Black

Motone Under Seat/Rear Frame Under Seat Indicator Brackets LC

These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame. These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run As is we have designed the holes to bolt on using any  Indicators with 8mm Threads Indicators with 10mm Threads OEM Triumph LED Indicators As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators our wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators) Fits Street Twin Street Cup Street Scrambler T100 LC T120   Note if you another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance

Motone Giger - Short Reach Headlight Brackets 41mm - Black

Motone Indicator/Turn Signal Brackets - for LC Triumphs - 8mm

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone Regulator/Rectifier Relocation Bracket for LC

This bracket is for moving the regulator down 90 degrees so that it fits under the bottom of the yoke - this allows for tucking your headlight further back closer into the frame of your bike for a neater look. There is enough stock cabling on the bike to allow the reg/rec to be placed in this new position however we highly recommend removing the tank and freeing up some cabling from the bindings under the tank to get more flex. This product will fit the bottom yoke of any 2016 and up T100 and T120  It also works with the first gen Street Twin / Street Scrambler / Street Cup before the regulator was moved by factory behind the rad. This product is recommended especially when fit with custom headlight brackets. If you have a dual disc bike like the T120 you may want to use additional black cable ties to secure the brake lines 

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)

Motone Street Twin Speedo Bracket

As the stock Triumph Street Twin is designed from the factory with a one piece Headlight and Speedo bracket assembly if you want to swap out the headlight brackets for something a little more subtle - or mount the light at a different orientation you'll also need a bracket to mount the speedo again. We have seen other attempts at speedo brackets on the market, with various compromises - often cut from simple flat aluminium plate which will pick up the road vibrations causing at best inaccurate read outs at speed and at worst failing after a year or so of use. The motone speedo bracket is structurally braced for strength as well as being manufactured using high pressure die casting.  There is no other aftermarket component supplier you will find using these kind of techniques to make parts for your Triumph. 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Black

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Brushed

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Polish

 

Motone Indicator/Turn Signal Brackets - for LC Triumphs - 10mm

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Polished

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone Lucas Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON 2001-2015 ONLY  (including both CARB and EFI bikes variants)

Motone Miller Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015 Present - Fits both CARB and EFI bikes.

Motone Front Indicator/Turn Signal Relocation Bracket - Silver

 

Motone Front Indicator/Turn Signal Relocation Bracket - BLACK

 

Motone LHS Ignition Relocation Bracket - BLACK

 

Motone RHS Ignition Relocation Bracket - BLACK

 

Motone Bates Style Bottom Mount Headlight Bracket - Black

Custom CNC milled from aviation grade billet 6061t aluminium. This sale is for a bottom mount headlight bracket as pictured IN BLACK. Includes bolts as pictured. Allows you to fit a bates style or any other bottom mount headlight to your bonnie without any drilling. We made this version with a slotted vertical hole, allowing precise adjustable fitment of the headlight on the vertical axis so you can properly line it up with the tank and the lines on the rest of the bike. Headlight mount slotted hole is machined to take a bates light with 10mm thread. Bracket mounts in place of where the stock regulator sits so no drilling required to fit. Regulator also needs to be relocated to the frame rails or elsewhere - we also make a bracket for this. For those wanting to use the part for a custom application (non-triumph) the distance between the 2 slotted horizontal bolt holes centre to centre is 85mm (3.34 inches) Bracket Suitable for use with all the air cooled Triumph Twins 2001-2015 so T100, Bonneville, Scrambler, Thruxton, Mag Wheel SE etc. The bracket also works some of the liquid cooled Twins ie the new T100, T120, Street Twin. Street Cup, Street Scrambler.     

Motone Regulator/Rectifier Frame Rail Relocation Bracket

 

Motone Indicator Brackets - Top Shock Mount - Polished

 

Motone Indicator/Turn Signal Brackets - Top Shock Mount - Black

 

Motone Indicator Brackets - Under Seat Mount - Polish

 

Motone Indicator Brackets - Under Seat Mount - Black

 

Motone Slingshot Custom Headlight Brackets 41mm - Black