Motone UNDERTAKER Number Plate Bracket + PillBox License Plate Light

This Kit is designed to fit to the underside of your rear fender/mudguard - its especially useful in situations where you dont have alot of room to mount the plate - as well the angle you set the plate at has some adjustment so it can be used in custom applications. Besides that it is also designed to couple with our fender mount tail lights including the Reprobate Tail Light on top of the fender should you wish (Its especially useful for the reprobate as the undertaker is equipped with a license plate illumination light)  It comes the the Pillbox our billet license plate illumination light.   The footprint of the 3 holes used to mount the kit are the same we use on all our fenders, so if you have one of our fenders with the predrilled holes this will bolt on.

Motone CYLON LED Taillight CE Street Legal Running & Brake Light

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone STEALTH SLIDERS/ Adjustable Rear Indicator Turn Signal Brackets - Number Plate Mount

License Plate Mount Indicator Brackets - Low-Profile  Indicator brackets clamp onto the slots in your rear number plate bracket - that allow for a sliding fit so they can be adjusted to sit at the width of your number plate however wide or narrow that may be.  Indicators with M8 Threads only (ie ICON or PICO from us)  Made out of Stainless Steel and Powder Coated in Black

Motone AC Pannier/Luggage Rails - RIGHT Hand Side Only - Black

Sold here in RHS Left Hand Side Only Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Smooth Welds Powder Coat BLACK Finish High Quality Pannier Rails built in 304 Stainless Steel  Suitable for Bonneville T100 CARB 2001-2008 Bonneville T100 EFI 2009-2016 Bonneville Mag Wheel 2009-2015 Scrambler CARB 2006-2008 Scrambler EFI 2009-2016 Thruxton CARB 2004-2008 Thruxton EFI 2009-2016    

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black/Contrast Polished

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone TITAN BOLTS Billet GR5 Titanium Brake Rotor Bolts - BLACK - Aircooled - 10 Piece Set

Part of our Titanium Series of Components this is a set of GR5 Titanium precision machined billet Brake Rotor Bolts for your 2001-2015 Triumph Bonneville. ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Full set of 10 pieces to fit both the Front and Rear Rotors on your bike.  Available here in PVD BLACK BOLT SPEC : M8x1.25x30   

Motone TITAN BOLTS Billet GR5 Titanium Brake Rotor Bolts - Natural Finish - Aircooled - 10 Piece Set

Part of our Titanium Series of Components this is a set of GR5 Titanium precision machined billet Brake Rotor Bolts for your 2001-2015 Triumph Bonneville. ALL MOTONE TITAN BOLTS COME PRELOADED WITH THREADLOCKER - READY TO FIT Full set of 10 pieces to fit both the Front and Rear Rotors on your bike.  Available here in Natural Titanium Finish BOLT SPEC : M8x1.25x30   

Motone TWISTER Clutch Cable Adjuster - BRASS - M8x1.25x18

Part of our BRASS  range of components. This is the TWISTER - BRASSY edition Precision machined out of Billet  C36000 Brass - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - BLACK - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up.  Finished here in Physical Vapour Deposition BLACK Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TWISTER Titanium Clutch Cable Adjuster - Natural Finish - M8x1.25x18

Part of our Titanium range of components. This is the TWISTER  Precision machined out of Billet GR5 Titanium - these Clutch Cable adjusters fit all Triumphs and replace the stock units that are prone to rusting up. Running an an M8 Thread they likely will also fit other Makes and Models of bikes as well 

Motone TELSTAR Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - BRASS

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Polished

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets - POLISHED

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR   -  THIS VERSION IN POLISHED FINISH Built out of High Pressure Die Cast Aluminium these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone Big Fin Exhaust Clamps for Aircooled - EFI - SHINY POLISHED

 

Motone Bar End Mirror Adapter Kit - 2001-2015 T100/Aircooled - PAIR

These BAR END Adapter Brackets are designed for your aircool (2001-2015) Triumph Bonneville T100 (or Thruxton or bike of that era with One Inch bars)  Inside the original Triumph bars is a female thread which these adapters screw right into (Screws included in the kit) meaning that you can then fit Bar End Mirrors - such as the ones we make - of course if by some temporary lapse of judgement you have some other brand bar end mirrors they will work too (although did you know ours are better)  SOLD IN PAIRS (2 pcs) Please note that if you no longer have the original bars but have some generic hollow ones with no thread inside we also make some adapters that will fit them too which we call the Exacta Mounts which are available here

Motone PIKE Brake and Clutch Lever Set - Triumph - Adjustable - Billet Aluminium Black

These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK TYPE R - REGULAR FIT (FOR MOST TRIUMPH TWINS) Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand After seeing all the cheap dangerous tat out there, as well as the gaudy colours that have ,we feel little place on a modern classic motorcycle we designed the PIKE levers to offer the best of both worlds in terms of style, quality and customisation. The PIKE levers fit MOST modern classic Triumph Twins from 2004 to the modern day The exception to this are the bikes with the Brembo master cylinders (TFC Bikes, Speed Twin 1200, Scrambler 1200 XC, Thruxton R/RS) - for these see Type B  AND SPEED TWIN 900 2025 ON PLUS SCRAMBLER 900 2026 ON - THESE NEED TYPE C (currently in development)   PIKE LEVERS TYPE R FIT ALL NEARLY ALL TRIUMPH TWINS (790cc and up) 2004 - NOW T100 & T120 - All Variants (Carb, EFI, Liquid cooled etc) 2004-  2025 TRIUMPH SCRAMBLER 900 (carb, efi, STREET SCRAMBLER, SCRAMBLER 900) 2016 - NOW TRIUMPH BOBBER / SPEED MASTER (all variants including America, all 900-1200cc etc)  2016 - 2024 STREET TWIN / STREET CUP / SPEED TWIN 900 2004 - 2015 THRUXTON (900cc variants)   

Motone PARABOLA Engine Oil Filler Cap - Dished - BRASS

Motone ICON LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone JETSON Dished Low Profile Fuel Gas Cap - Billet Aluminium - Black

Motone Airblade Aluminium Screen Black Anodised Finish

Fabricated and Brushed then Black Anodised out of 5052 Aluminium we designed the Airblade originally on the Triumph Bonneville T100  New product so far known to fit - T100,  T120, Speed Twin.     

Motone PARABOLA Engine Oil Filler Cap - Dished - Black

Motone Ballista hot forged CHROMED vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel) These are Sold as a Pair and available here in CHROME finish  

Motone Wrap-Around Fork M8 Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone ICON MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone The KLINGONS v2 - M8 Indicator Handlebar Mount Bracket Kit - PAIR

These are the KLINGONS - the idea of these is so that you can mount your Indicator (We recommend the PICO for these as they are small and lightweight) onto the underside of your handlebar. SOLD AS A PAIR (SET OF 2) - UPDATED VERSION 2.0  They come with a set of M4 stainless Socket Caps that replace the original M4 Bolts on the bars and provide enough length then mount the KLINGONS. Version 2.0 of these contains an extra L shaped bracket which adjusts the offset so that both indicators now end up in perfect symmetrical centre alignment with the headlight  We elected to use investment cast Stainless Steel to make the KLINGONS as they are so small the extra strength provided by using 300 series stainless means you can rest assured they will hold your Indicators on safely  We found that many Triumphs we looked at had M4 bolts on the bars on the control/perch brackets So far known to work on T120 / T100 / Bobber / Street Twin / Speed Twin 900 - will update more when we confirm 

Motone PICO MULTI LED 3in1 Taillight/Brake Light/Indicator Turn Signals - PAIR - Black - M8

Motone Casablanka -Passenger Peg Delete / Blanking Plates / Forged Edition

Motone Gort Light in Krackle Black - Tail Tidy - Loom - Kit

Motone XL Plug and Play Wiring Harness Adapter - for Side Mount License Plate Air cool 2001-2015

Motone PICO LED T/S Indicator Turn Signals - PAIR - Black - M8

Motone Microblade Aluminium Screen Gloss Black

Drawn out of sheet 5052 Aluminium and then GLOSS BLACK finished  So far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200, Scrambler 1200  

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - BLACK

 

Motone The Clampits - 41mm - Indicator/Turn Signal Fork Mount Brackets

Ladies and Gentlemen these are the Clampits  - SOLD AS A PAIR  Built out of High Pressure Die Cast Aluminium (we also have a similar version in Aluminum for you Americans) these clamps wrap around your fork - in this case any 41mm fork - and you can bolt on your Indicator - they will work with Indicators that have 8 or 10mm sized threads (so any of the ones we make and most all of the ones out in the world)  Depending on your bike and the overall look you are going for you may wish to position your indicators at the front or rear side of the fork - these work either way around.  Other versions for other fork sizes are also in development  Common Bikes with 41mm Forks Include - Triumph Bonneville, T100, T120, Street Twin, Scrambler 900, Mag Wheel, Royal Enfield Interceptor, new Honda CB350, and many more 

Motone L-CLAMPS Number/License Plate Bracket Rear Indicator/Turn Signal Mounts

New License Plate Indicator Brackets - the L-CLAMPS L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket  Indicator brackets work with All Aftermarket Indicator out there  (8 or 10mm Thread no problem) Triumph OEM (Factory Original) Type Indicators  Includes blanking plates if not using the OEM holes Made out of Stainless Steel and Powder Coated in Black

Motone Talon - Ribbed Clutch Lifter Cover - BRASS

Ribbed Clutch Lifter Cover, Hot Forged Solid Brass! Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - AC - Contrast Polish/Black

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles - this version is powder coated Black which we then mask and then mirror polish the top face for a contrast finish  2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU569 (or variant) instead  

Motone "The Godfather" Top Yoke / Steering Stem TITANIUM Nut - AC - Spun Metal Finish

Machined out of GR5 Billet Titanium - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles 2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU561 instead  

Motone Tailored Bike Protector/Workshop Cover - Bonneville/T120/T100/Street Twin/Enfield

Tailored to protect your Pride and Joy - Double Layered - Double Stitched - UV proof outer, silky inner to protect paint work against scratches  For use inside Garage/House/Kitchen/Workshop   Tested to fit on :  Bonneville T100 / T120 / Street Twin / Speed Twin / Thruxton / Street Scrambler  Royal Enfield Interceptor / Continental GT      

Motone The Capos - Fork Top Caps Pair - Early - Titanium

The Capos - Machined out of Biller GR5 Titanium Alloy to compliment "The Godfather" Titanium Yoke Nuts  Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-Present T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU54 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU563

Motone Skinny - Bonneville Seat Base Kit - ABS Seat Pan incl Rubbers and Hooks

High-Tail Mudguard - Predrilled for Motone Fender Mount Light Kits - BLACK - AC

   

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack

Motone BRASS Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed

Motone Morningstars XL - Titanium Hero Blobs / Peg Scrapers / Lean Feelers XL / AC

Machined out of GR5 Billet Titanium  THESE ARE THE XL ONES - STOCK LENGTH ON AIR COOLED BIKES (2001-2015) BUT EXTRA LONG ON LIQUID COOLED (2016-NOW) - SO IF YOU FIT THIS VERSION TO LC BIKE - MORE SAFETY SPARKS GUARENTEED   These peg scrapers will help let you and any friends behind you, discover an appropriate safe riding angle. Version B - these are suitable for all the Triumph Twins however on some models like the Bobber and Speedmaster which have fairly low pegs we recommend version A.

Motone Bonneville Skinny Seat - The Mamba - Black & Tan

Motone Stainless Steel - Engine Crash Bar Kit - Black

Bent out of 25mm o/d 300 Series Stainless Steel and Powder Coated Black Supplied with Bolt fixing  These Crashbars are designed to fit on the frame of all the Aircooled Bonnevilles from 2001-2015 such as the T100, the Bonneville, the Thruxton 900 etc. They also fit the AMERICA and the SPEEDMASTER models for the same era both carb and EFI variants  Please note the regulator needs to be located in original position on the bike to fit these guards If you have fit Ignition Relocation Bracket its still possible to relocate to the side of the frame but you will need some extended bolts for them to be compatible with these guards.   Other than that good to go on all models. Note we made these out of high quality 300 series Stainless Steel - beware cheap imitations - also available in mirror polished finish Note Whilst they will fit the Scrambler Frame they cannot be run in conjunction with the Scrambler High Pipes

Motone Stainless Steel - Engine Crash Bar Kit

Bent out of 25mm o/d 300 Series Stainless Steel and Mirror Polished  These Crashbars are designed to fit on the frame of all the Aircooled Bonnevilles from 2001-2015 such as the T100, the Bonneville, the Thruxton 900 etc.    They also fit the AMERICA (carb or EFI) and the SPEEDMASTER (carb or EFI) Please note the regulator needs to be located in original position on the bike to fit these guards If you have fit Ignition Relocation Bracket its still possible to relocate to the side of the frame but you will need some extended bolts for them to be compatible with these guards.   Other than that good to go on all models. Note we made these out of 300 series Stainless Steel which has high chromium content yet will not rust like the mass produced mild steel bars that have been chromed.  Also available in a Black powder coat version. Please note Whilst they will fit the Scrambler Frame they cannot be run in conjunction with the Scrambler High Pipes

Motone Big Fin Exhaust Clamps - Black/Contrast Polished Fins - EFI

 

Motone Engine Oil Filler Cap - Roswell - Solid Black

High-Tail Mudguard - Predrilled for Motone Fender Mount Light Kits - Polished - AC

   

High-Tail Mudguard - Predrilled for Motone Fender Mount Light Kits - Brushed- AC

   

Motone Giger - Short Reach Headlight Brackets 41mm - Black

Motone The Guvnors - Fork Top Caps Pair - Early - Brass

Please Check Specific Bike Model and Year before purchasing as these as they vary per bike. This particular version fits 2001-2015 Twins including T100, Bonneville, SE, Scrambler, Speedmaster, America but not the Thruxton 2016-2018 Early Street Twin and Street Scrambler (Bikes with regulator under the yoke not behind the Rad) Street Scrambler VIN under 914448, Street Twin VIN under 914974 Street Cup all years 2016-2018 T100 2017-2020 Single Disc 41mm Fork Bobber (The first bobber with the 19 inch front wheel)  For 47mm Fork Bobber (Bobber Black 2018-Present) and Speedmaster (2021-Present) See Part MMU516 For T120, 2016-2020 Speedmaster, Speed Twin, Thruxton (2016-Present), Late Street Twin, Late Street Scrambler see MMU514

Motone Talon - Ribbed Clutch Lifter Cover - Black

Ribbed Clutch Lifter Cover, Finished in Black Attaches to the lifter using a pair of stainless grub screws - allen key supplied Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone Talon - Ribbed Clutch Lifter Cover - Black with Polished Ribs

Ribbed Clutch Lifter Cover, Finished in Black with the fins Contrast Polished! Suitable for the aircooled Twins thats Bonneville, T100, SE, Mag Wheel, Scrambler, Thruxton 900, Speedmaster and America built from 2001-2015 

Motone Speedster Sprocket Cover - Ribbed - Black with Contrast Polished Fins - AC

Motone Tanto Chain Guard - Polished

Tanto - named after the traditional Japanese short sword  Built out of 304 Series Stainless Steel and supplier here in a Mirror Polished Stainless Metal Finish To suit your 2001 to 2015 : T100 , Scrambler, SE, Thruxton, Mag Wheel, Bonneville

Motone Tanto Chain Guard - Brushed

Tanto - named after the traditional Japanese short sword  Built out of 304 Series Stainless Steel and supplier here in a Brushed Metal Finish To suit your 2001 to 2015 : T100 , Scrambler, SE, Thruxton, Mag Wheel, Bonneville

Motone AC Pannier/Luggage Rails - Left Hand Side Only - Black

Sold here in LHS Left Hand Side Only Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Smooth Welds Powder Coat BLACK Finish High Quality Pannier Rails built in 304 Stainless Steel  Suitable for Bonneville T100 CARB 2001-2008 Bonneville T100 EFI 2009-2016 Bonneville Mag Wheel 2009-2015 Scrambler CARB 2006-2008 Scrambler EFI 2009-2016 Thruxton CARB 2004-2008 Thruxton EFI 2009-2016    

Motone Magnum Force - Brass Exhaust Clamp Nuts

Magnum Force Forged Brass Exhaust Clamp Stud Nuts Set Of 4 - Hot Forged Individually out of solid Brass  Will fit all the 2001 to Now Triumph Twins Street Twin / Street Cup / Street Scrambler / Scrambler 1200 / Thruxton / Speed Twin / Bobber / T100 / T120 / SE / Scrambler 900 / Speed Twin 900 etc etc

Motone BlackJack Union Jack Monza Cap Kit for Triumph and HD - Contrast Polished

 

Motone CHOPSAW Engine Oil Filler Cap - Shot Blast - Frosty

Motone CHOPSAW Engine Oil Filler Cap - Hard Black - Stealth

Motone Solid Brass Monza Cap Kit - Limited Run

 

Custom Mudguard Predrilled for Motone Fender Mount Light Kits - Black - AC

   

Motone Finned EFI Carb Tops Contrast Cut Brass

Motone Finned EFI Carb Tops Polished

Motone The Capstan! Luggage/Strap Attachment Spool - Brass

Motone AC Pannier/Luggage Rails - Pair - Black

Sold as Pair Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Smooth Welds Powder Coat BLACK Finish High Quality Pannier Rails built in 304 Stainless Steel  Suitable for Bonneville T100 CARB 2001-2008 Bonneville T100 EFI 2009-2016 Bonneville Mag Wheel 2009-2015 Scrambler CARB 2006-2008 Scrambler EFI 2009-2016 Thruxton CARB 2004-2008 Thruxton EFI 2009-2016    

Motone Eldorado Light in Solid Brass - Tail Tidy - Loom - Kit

Motone Shock Mount Finishing Kit Brass

 

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Contrast Polish

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black Contrast Polished

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Finned/Ribbed - Black

Motone Pressure Cast Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack Domed

Motone AC Pannier/Luggage Rails - Pair - Polished

Sold as Pair Motone Quality : Built from 16mm Diametre Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness Smooth Welds Mirror Polished Finish High Quality Pannier Rails built in 304 Stainless Steel - Mirror polished Suitable for Bonneville T100 CARB 2001-2008 Bonneville T100 EFI 2009-2016 Bonneville Mag Wheel 2009-2015 Scrambler CARB 2006-2008 Scrambler EFI 2009-2016 Thruxton CARB 2004-2008 Thruxton EFI 2009-2016    

Motone Microblade Aluminium Screen Mirror Polish Finish

Drawn out of sheet 5052 Aluminium and then mirror polished by hand New product so far known to fit - T100,  T120  all years  Also Adaptable for various other bikes including Yamaha XSR, Scrambler 1200 etc     

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Black

Motone The Quad Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Ballista hot forged brass vintage Michelin style valve caps

Sold as a Pair Ballista valve stem caps - formed using the same traditional forging techniques used by Michelin in the 1950s to add some class to your Motorcycle (or even car/hot rod etc wheel These are Sold as a Pair and available here in brass finish  

Motone Copper Exhaust Ring Gaskets - AC

Suitable for use on all Air Cooled Triumph Bonneville Motors 2001-2015   Triumph Bonneville Triumph Bonneville T100 Triumph Scrambler Triumph Thruxton  

Motone Steel License/Number Plate Bracket Insert Round Light

Laser cut out of steel and powder coated Black these brackets are designed to work with the bolt spacing on any of our Round tail lights (Eldorado, Bel Air, Miller, Lecter, Cuda, etc)  You can use this bracket anywhere on the bike - or it also is designed to slide in between our fender light brackets and our tail lights in an assembly so you can mount a plate with them, with the down facing lights on the tail light illuminating the plate.  Often used in Combination with our Rear Mudguards etc Also check out the L-CLAMPS if you want to bolt some Indicators to the License Plate bracket 

Motone "THE BOSS" MK.II Top Yoke / Steering Stem BRASS Nut - AC

Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2001 to 2015 Triumph Twin Motorcycles  Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut  This version Fits all the aircooled Bonnevilles 2001-2015 Triumph Bonneville, T100, Scrambler, Thruxton, Mag Wheel, Speedmaster, America and also the Thunderbird    Please note if you have a 2016 or newer Bonnie you need part MMU068 instead  

Motone Microblade Aluminium Screen Black Anodised Finish

Drawn out of sheet 5052 Aluminium and then Anodised BLACK New product so far known to fit - T100,  T120 all years , Thruxton 900, Thruxton 1200 This page will be updated in due course as we test on new bikes, we will also cover your returns costs should you have a bike that isnt listed and are not sure if it fits - in that case send us a message or give us a call first.   We have a different version coming for Speed Twin and Street Twin 

Motone Extended 66mm Long Gear Shifter Lever End Peg - Ribbed - Black

Custom CNC turned out of aviation grade billet 6061t aluminium. EXTENDED LENGTH : TOTAL 66mm (2.5 Inch) Long Ribbed foot peg as pictured in Black.  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle.

Motone Airblade Aluminium Screen Brushed Finish

Built out of 5052 Aluminium - Brushed Finish New product so far known to fit - T100,  T120, Speed Twin.   

Motone Quick Release Seat Bolts - Brass

 

Motone Quick Release Side Panel Bolts - Brass

Motone Raceblade Front Mudguard/Fender- Spoke Wheels - Black Anodised Aluminium

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Anodised BLACK  - this front mudguard is bolt-on for your Triumph Bonneville with spoked rims/wire wheels. Good for Bonneville, T100, Scrambler, Thruxton. Not for mag wheel FITS ALL YEARS HINCKLEY BONNEVILLE T100/BONNEVILLE/THRUXTON/SCRAMBLER :2001-2015 - Fits both CARB and EFI bikes.

Motone Engine Oil Filler Cap - Roswell - Brass

Motone Airblade Aluminium Screen Quicksilver Polished Finish

Fabricated and Mirror Polished out of 5052 Aluminium we designed the Airblade originally on the Triumph Bonneville T100  New product so far known to fit - T100,  T120, Speed Twin.  This page will be updated in due course as we test on new bikes, we will also cover your returns costs should you have a bike that isnt listed and are not sure if it fits - in that case send us a message or give us a call first   

Motone Knurled Choke Knob - Brass

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Polished

Classic style parcel rack. A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel and mirror polished Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany      Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone Aero Parcel Rack - Stainless Steel - Universal Tank Rack - Black

The Aero A faithful reproduction of triumphs signature tank racks, these racks are made from 304 series stainless steel finished in black powder coat. Rack affixes to your tank using Vacuum Suction pads specially designed and produced for us in Germany.   Please note due to the central rib in the tank these will not work on Scrambler 1200 and R9T

Motone Bonneville Skinny Seat - The Krait - Tobacco

Motone H4 Headlight Extension Cable

Motone Monza Cap Kit for Triumph and HD - Black

 

Motone Monza Cap Kit for Triumph and HD - Black/Contrast Polished

 

Motone Bonneville Skinny Seat - The Krait - Rare Earth

Motone Bel Air Tail Light in Black - Tail Tidy - Loom - Kit

Motone Eldorado Light in Black - Tail Tidy - Loom - Kit

Motone Bonneville Skinny Seat - The Krait - Black

Motone Bonneville Skinny Seat - The Mamba - Black

Motone Classic Leather Key Fob

Handmade by skilled craftsmen from extra thick, high quality Top Grain Cowhide Leather.  Tanned and oiled using traditional processes that will in time produce a vintage worn-in patina. Hand stitched border with burnished edges framing the embossed Motone legend. The perfect way to keep you keys safe and complement the look and style of your modern classic or custom build.   This is first in a range of stylish hard wearing leather goods from Motone Customs.   Built to Last long lasting weather resistant finish

Motone High Mount Front Fender/Mudguard Bracket

Motone High Mount Fender Bracket for the Triumph Twins - Built out of Grade 304 Stainless Steel and Powdercoated Black. Fits both 2001-2015 Aircooled and 2016-Now Liquid Cooled Bikes We selected stainless steel as the metal of choice for this bracket over aluminum due to the increased torsional strength offered.  This listing is for Bracket and fixing kit only, Fenders are sold separately - The Bracket works with the Motone Shorty Fender, or the Duckbill, or the Raceblade.   As well as the fenders we make itll also work with the stock fender on those bikes that have a shorter rather than longer front fender mudguard. So for the liquid cooled (2016 and up) bikes the Street Twin and the Street Cup and the Street Scrambler for example you can use use the stock fender with this bracket if you like.  However the T100 and the T120 stock fenders are too long.   For the Aircooled bikes its a similar story, the stock Thruxton 900 and Scrambler fenders work fine but the T100 is too long.   Compatible as follows : T100 2001-2008 (when used with Motone fender) T100 EFI 2009-2016 (when used with Motone fender) Bonneville Mag Wheel 2008-2015 (when used with Motone fender) Scrambler 2006-2008 (when used with Motone fender or stock fender) Scrambler EFI 2009-2016  (when used with Motone fender or stock fender) Street Cup 2017-Now (when used with Motone fender or stock fender) Street Twin 2016-Now (when used with Motone fender or stock fender) Street Scrambler 2017-2018 (when used with Motone fender or stock fender) DOES NOT FIT 2019 STREET SCRAMBLER Bonneville T100 LC 2016-Now (when used with Motone fender) Bonneville T120 LC 2016-Now (when used with Motone fender) Thruxton 2004-2008 (when used with Motone fender or stock fender) Thruxton 900 EFI 2009-2016 (when used with Motone fender or stock fender)      

Motone Monza Cap Kit for Triumph and HD - Brushed Finish

 

Motone Bobbed Rear Mudguard/Fender - Polished Aluminium - Short Reach

   

Motone Ribbed Side Panels - Matte Black

Motone Up-And-Over Riser Kit for One Inch Bars - Black

Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars. We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position.  This is about as far as you can take the stock bars without having to install longer cables. Easy to fit at home with basic tools.  Fits : T100 (all years aircooled and liquid cooled), T120, Speedmaster (air and liquid cooled models), Bobber, Thruxton EFI, America  

Motone Gear Shifter Lever End Peg - Ribbed - Brass

Ribbed foot peg as pictured in BRASS  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle. Please note this item wont work on the Thruxton as the peg is not removable 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Black

 

Motone Complete Engine and Exhaust Gasket Kit AC

 

Motone Bonneville Cafe Racer Seat - Diamondback - Brown/Black Two Tone

Motone Speedster Sprocket Cover - Ribbed - Polished - AC

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Brushed

 

Motone TRILINE Indicator/Turn Signal Ribbed Brackets - Top Shock Mount - Polish

 

Motone Bonneville Dual Seat - Diamond Stitch - Brown/Black

Motone Speedster Sprocket Cover - Ribbed - Brushed - AC

Motone H4 Headlight Module - Battery Saver / Safe Start

Motone Triumph Turn Signal Wiring Adapter (for Air Cooled Bonnies 2001-2016)

Motone Triumph Bonneville T100 AC Universal Mirror Adapters

Suitable for aircooled T100 2001-2015 These adapters allow you to remove the stock Triumph brand mirrors on your T100 and replace them with any kind of aftermarket mirrors which fit with a normal 10mm thread. The bottom shaft of the adapter fits in place of the Triumph mirrors on the handlebar and is threaded internally to be fastened with the stock mirrors nut and washer.  The hex bar part of the top of the adapter has a 10mm thread machined into it to allow fitment of any mirror. Turned out of aluminium and anodised black

Motone Speedster Sprocket Cover - Ribbed - Black - AC

Motone Airbox Elimination Kit - Battery Box

Motone Duckbill Front Mudguard/Fender - Gloss Black - AC

Motone Shorty - Bobbed Front Mudguard/Fender- Spoke Wheels - Black Anodised Aluminium

   

Motone Monza Cap Kit for Triumph and HD

 

Motone Custom Fuel Gas Cap - Billet Aluminium - Spun Satin Finish

Motone Bonneville Cafe Racer Seat - Diamondback - Black

Motone Bonneville Dual Seat - Rattlesnake Tail - Black

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Polished

Motone Raceblade Front Mudguard/Fender- Spoke Wheels - Brushed Aluminium

Motone Rippled EFI Carb Tops Polish

Motone Rear Mudguard/Fender - Brushed Aluminium

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then hand brushed - this rear mudguard is bolt-on for your Triumph Bonneville. Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back. 180mm in width (7 inches) Good for 2001-2015 (AIR COOLED) Bonneville, T100, SE, Scrambler, Thruxton.    

Motone Bobbed Rear Mudguard/Fender - Polished Aluminium

   

Motone Shorty - Bobbed Front Mudguard/Fender- Spoke Wheels - Brushed Aluminium

   

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Shorty - Bobbed Front Mudguard/Fender- Spoke Wheels - Polished Aluminium

   

Motone Triple Micro Switch Button Housing - One Inch Handlebar - Black

Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 41mm - Black

Motone Bonneville Cafe Racer - cafe - Black

MOTONE FULLY COVERED COMPLETE INJECTION MOLDED SEAT : INCL SEAT HOOKS + RUBBER BUFFERS     Our seat base is designed to fit all of the aircooled Triumph Twin range from 2001 to 2015. One Inch slimmer than stock in width. Built on an Injection molded ABS Base.  Using high density 80kg/m3 Polyeurythene Foam for comfort when touring. THIS SEAT : CAFE RACER / DIAMOND STITCH PATTERN : BOLT ON GOOD TO GO FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015 Fits both CARB and EFI bikes. If your bike is 2016 or newer please see our other seats for those models

Motone Bonneville Dual Seat - Ribbed - Black

MOTONE FULLY COVERED COMPLETE INJECTION MOLDED SEAT : INCL SEAT HOOKS + RUBBER BUFFERS     Our seat base is designed to fit all of the aircooled Triumph Twin range from 2001 to 2015. One Inch slimmer than stock in width. Built on an Injection molded ABS Base.  Using high density 80kg/m3 Polyeurythene Foam for comfort when touring. THIS SEAT : DUAL LENGTH SUITABLE FOR TWO-UP RIDING / RIBBED STITCH PATTERN : BOLT ON GOOD TO GO FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015- Fits both CARB and EFI bikes. If you have a 2016-Present Bike - Check out the Viper Seat instead

Motone Dual Micro Switch Button Housing - One Inch Handlebar - Chrome

 

Motone Dual Micro Switch Button Housing - One Inch Handlebar - Black

 

Motone Custom Billet Indicator Turn Signals - Pair - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Brushed

Motone Custom Billet Indicator Turn Signals - Set of 4 - Black

Motone Bonneville Seat Base Kit - ABS Seat Pan incl Rubbers and Hooks + Dual Saddle Foam

Motone Bonneville Seat Base Kit - ABS Seat Pan incl Rubbers and Hooks + Cafe Racer Hump Foam

Motone Lucas Tail Light - Tail Tidy Plate - Loom - KIT

Motone Raceblade Front Mudguard/Fender- Spoke Wheels - Polished Aluminium

Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then mirror polished - this front mudguard is bolt-on for your Triumph Bonneville with spoked rims/wire wheels. Good for Bonneville, T100, Scrambler, Thruxton. Not for mag wheel FITS Aircooled HINCKLEY BONNEVILLE T100/BONNEVILLE/THRUXTON/SCRAMBLER :2001-2015 - Fits both CARB and EFI bikes.

Motone Big Fin Exhaust Clamps - EFI

 

Motone Lay Flat Dash - Gauge - Speedo/Tacho Clock Mount + Ignition Relocation Bracket - VDO

 

Motone Lay Flat Dash - Guage - Speedo/Tacho Clock Mount Bracket - VDO

 

Motone Custom Top Riser Clamp Bridge Piece - for One Inch Bars - Black

Motone Billet Fork Brace MK.II - Chrome

 

Motone Billet Fork Brace MK.II - Black

 

Motone Rear Disc Brake Caliper Relocation Bracket

Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium.  Anodised Black. Relocates caliper to over the top of the disc in the 12 o clock position, as opposed to the stock position which is directly under  at 6 o clock.   Fitting this bracket has the dual purpose of both reducing the amount of dirt and road debris (therefore damage) that your caliper pick ups. As well it also reduces the maintenance intervals required to keep the caliper/brake setup running smooth and clean.    This caliper bracket is designed to fit with the stock Triumph cables - new cables not required - the existing cable can be rerouted around the frame.  Bled and refit.   FITS :  2001-2015 T100,Bonneville,Mag wheel, Scrambler, Thruxton - Fits both CARB and EFI bikes.NOTE - BRAKES ARE SAFETY CRITICAL AREA OF THE MOTORCYCLE AND AS SUCH ANY MODIFICATIONS SHOULD BE TAKEN BY QUALIFIED SERVICE PROFESSIONALS ONLY. Its also worth noting that Triumph factory manual states the stock brake calipers themselves need full servicing at least every 2 years by a professional mechanic using factory parts. There is good reason for this, for example using the wrong sealing lube can cause rubbers to swell etc.  

Motone Classic Cafe Racer custom Knee Pads - Black Pinstripe

   

Motone Fuel/Gas/Petrol Tank Custom Knee Pads - Union Jack

This sale is for a set of two seat custom rubber knee pads for your Triumph Twin (or other motorcycle) as pictured . In Black.Design :  Union Jack Black - Manufactured using a blended vulcanized natural rubber to produce a high quality weather resistant compound. Adhesive : 468MP Automotive 3M - selected for its strength and resistance to all weather elements plus gasoline.BUILT TO LAST  As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.   

Motone Gear Shifter Lever End Peg - Ribbed - Black

Custom CNC turned out of aviation grade billet 6061t aluminium. This sale is for the Ribbed foot peg as pictured in Black.  The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it. We recommend to use thread locker when fitting this and many other parts to your motorcycle.

Motone Gear Shifter Lever End Peg - Ribbed - Aluminium

 

Motone Adjustable Short Shifter Gear Selector Lever and Peg - Polish

   

Motone Adjustable Short Shifter Gear Selector Lever and Peg - Black

   

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Black

CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap. Will not fit the round shaped reservoirs as fitted to some models with 7/8s bars. Some models it will fit include Bonneville, T100, America, T120, Speedmaster, Thruxton.

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Polish

Billet Disc Brake Oil Reservoir Master Cylinder Cap - Motone Logo - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Black

Motone Billet Disc Brake Oil Reservoir Master Cylinder Cap - Union Jack - Polish

Motone Lucas Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON 2001-2015 ONLY  (including both CARB and EFI bikes variants)

Motone Miller Tail Light / Turn Signal / Number Plate Bracket Assembly - Bracket Only

3 Plate Assembly consisting of Tail Light Bracket / Number Plate Bracket / Indicator Brackets BRACKET IS DESIGNED TO FIT IN STOCK HOLES ON FACTORY TRIUMPH REAR MUDGUARD/FENDER Without any drilling required. FITS ALL YEARS HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2001-2015 Present - Fits both CARB and EFI bikes.

Motone Left+Right Side Shock Mount Helmet Lock Kits

 

Motone Right Side Shock Mount Helmet Lock and Keys

 

Motone Front Indicator/Turn Signal Relocation Bracket - Silver

 

Motone Front Indicator/Turn Signal Relocation Bracket - BLACK

 

Motone LHS Ignition Relocation Bracket - BLACK

 

Motone RHS Ignition Relocation Bracket - BLACK

 

Motone Bates Style Bottom Mount Headlight Bracket - Black

Custom CNC milled from aviation grade billet 6061t aluminium. This sale is for a bottom mount headlight bracket as pictured IN BLACK. Includes bolts as pictured. Allows you to fit a bates style or any other bottom mount headlight to your bonnie without any drilling. We made this version with a slotted vertical hole, allowing precise adjustable fitment of the headlight on the vertical axis so you can properly line it up with the tank and the lines on the rest of the bike. Headlight mount slotted hole is machined to take a bates light with 10mm thread. Bracket mounts in place of where the stock regulator sits so no drilling required to fit. Regulator also needs to be relocated to the frame rails or elsewhere - we also make a bracket for this. For those wanting to use the part for a custom application (non-triumph) the distance between the 2 slotted horizontal bolt holes centre to centre is 85mm (3.34 inches) Bracket Suitable for use with all the air cooled Triumph Twins 2001-2015 so T100, Bonneville, Scrambler, Thruxton, Mag Wheel SE etc. The bracket also works some of the liquid cooled Twins ie the new T100, T120, Street Twin. Street Cup, Street Scrambler.     

Motone Regulator/Rectifier Frame Rail Relocation Bracket

 

Motone Indicator Brackets - Top Shock Mount - Polished

 

Motone Indicator/Turn Signal Brackets - Top Shock Mount - Black

 

Motone Indicator Brackets - Under Seat Mount - Polish

 

Motone Indicator Brackets - Under Seat Mount - Black

 

Motone Shock Absorber Finishers/Dress Up Kits - Polish

 

Motone Shock Absorber Finishers/Dress Up Kits - Black

 

Motone The Capstan! Luggage/Strap Attachment Spool - Aluminium

Motone Passenger Peg Delete / Blanking Plates / Stealth Version - No Exhaust Hanger

Motone Knurled Choke Knob - Black

Motone Mirror Delete Plugs (One Inch Bars)

Motone Quick Release Aluminium Side Panel Bolts - Polished

Motone Quick Release Aluminium Side Panel Bolts - Black

Motone Quick Release Aluminium Seat Bolts - Black

Motone Quick Release Aluminium Seat Bolts - Polish

 

Motone XS Quick Release Aluminium Seat Bolts - Black

Top Quality custom CNC milled from aviation grade billet 6061t aluminium.This is the short (28mm without thread) version which remains the most low profile look on the bike when fitted. Integrated captive stainless hex head bolt so can be torqued with allen key when required as well - knurled sides for tool-less turning.   FITS ALL YEARS AIRCOOLED HINCKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON/MAG WHEEL : 2001-2015 Fits both CARB and EFI bikes. 

Motone XL Quick Release Aluminium Seat Bolts - Black

 

Motone Custom Fuel Gas Cap - Billet Aluminium - Black

Motone Custom Fuel Gas Cap - Billet Aluminium - Polished

Motone Custom Fuel Gas Cap - Billet Brass and Aluminium

Motone Custom Fuel Gas Cap - Billet Aluminium - Rippled

Motone Infinity Gas Cap - Brass Rippled Top - Aluminium Thread - Rippled

Motone Billet Velocity Stack - Airscoop Intake - Bellmouth - Black

Motone Handlebar Riser Inserts - One Inch Rise - For One Inch Bars - Clear/Silver

Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminium. Includes all fixings necessary to mount to bike - Bolt on part - Easy to fit. Top Quality custom CNC milled from aviation grade billet 6061t aluminum. This sale is for pair of handlebar riser inserts - which will raise your stock bars straight up by One Inch FITS HINCKLEY BONNEVILLE T100 : 2001-2015 - Fits both CARB/EFI bikes FITTED WITH ONE-INCH BARS ONLY (WILL FIT YOUR THRUXTON/SE/ETC IF ITS ONE-INCH HANDLEBAR MODEL) Does not fit 2016 and up liquid cooled bikes - other version in the works for these 

Motone Handlebar Riser Inserts - One Inch Rise - For One Inch Bars - Black

Motone Slingshot Custom Headlight Brackets 41mm - Black

Motone Finned EFI Carb Tops Contrast Cut 8 Balls Black

Top Quality custom CNC milled from aviation grade billet 6061t aluminum. This sale is for pair of throttle body "carb" tops as pictured in 8 Ball Design Totally bolt-on part FITS ALL YEARS EFI HINKLEY BONNEVILLE T100/SE/SCRAMBLER/THRUXTON : 2008-2015 Present - Fits all EFI bikes.

Motone Custom Sprocket Cover - Black

   

Motone Finned EFI Carb Tops Contrast Cut Black

Motone Plug and Play Wiring Harness Adapter - for rear Mudguard Mount Indicators

Motone Sump Guard - Bash Plate - Skid Plate - Triumph T - Black

Motone Sump Guard - Bash Plate - Skid Plate - Triumph T - Silver