Motone Reprobate Tail Light - LED - MATTE KRACKLE BLACK

Our Take on the Classic Mini Bates Rear Light - Originally we were going to call this the Master... but er nvm Available here in full MATTE KRACKLE BLACK - POWDER COAT The Footprint/Bolt Pattern on the light is the same as we use on all our Tail lights which means its bolt on to any of our pre drilled mudguards.   Designed to fit on top of the mudguard there is no down facing LEDs with this design so with that in mind if you do require a license plate holder (with plate light illumination) that couples with this part check out the UNDERTAKER   Full SMD-LED circuit board. Works as Running Light & Brake Light High Pressure Die Cast Aluminium Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Reprobate Tail Light - LED - GLOSS BLACK

Our Take on the Classic Mini Bates Rear Light - Originally we were going to call this the Master... but er nvm Available here in full GLOSS BLACK The Footprint/Bolt Pattern on the light is the same as we use on all our Tail lights which means its bolt on to any of our pre drilled mudguards.   Designed to fit on top of the mudguard we have also developed a number plate holder (with plate light) called the UNDERTAKER as a separate stand alone piece that also couples with the REPROBATE should you demand such a thing.  Full SMD-LED circuit board. Works as Running Light & Brake Light High Pressure Die Cast Aluminium Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Gort Tail Light - LED - Polished Aluminium

Gort!  This version in Polished finish - Cast in Solid Metal - Aluminium Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium    Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Eldorado Tail Light - LED - Krackle Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Krackle Matte Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Eldorado Tail Light + Fender Mount Kit - Krackle Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Krackle Matte Powder Coat Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Gort Tail Light - LED - Krackle Black

Gort!  This version in Textured/Wrinkle Powder Coat BLACK  Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Gloss Black Finish    Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth  

Motone Eldorado Tail Light - LED - Solid Brass

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Forged Brass with a Polished Finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Cuda Tail Light + Fender Mount Kit - Black

'Cuda - Like the Fish Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Cuda Tail Light - LED - Black

Motone Cuda Tail Light + Fender Mount Kit - Polish

Cuda - Fish Tail Tail light Kit Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Polished Finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Cuda Tail Light - LED - Polish

Motone Lecter Tail Light + Fender Mount Kit - Polish

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Polished Finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Lecter Tail Light + Fender Mount Kit - Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Lecter Tail Light - LED - Polish

Motone Lecter Tail Light - LED - Black

Motone Lecter Tail Light + Fender Mount Kit - Shot Blast

Motone Lecter Tail Light - LED - Shot Blast

Motone Eldorado Tail Light - LED - Black/Polish

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium in Black with a Polished Bezel Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Eldorado Tail Light + Fender Mount Kit - Black/Polish

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Finish and Polished Bezel Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Bel Air Tail Light + Fender Mount Kit - Polish

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Polished Finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Bel Air Tail Light + Fender Mount Kit - Black

Motone Bel Air Tail Light + Fender Mount Kit - Shot Blast

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Shot Blast finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Eldorado Tail Light + Fender Mount Kit - Polish

Motone Eldorado Tail Light + Fender Mount Kit - Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Sold here as kit which includes matching cast Rear Fender Mount Bracket, Rubber Gasket and Stainless Bolts

Motone Eldorado Tail Light + Fender Mount Kit - Shot Blast

Motone Big Fin Tail Light + Fender Mount Kit - Shot Blast

Motone Big Fin Tail Light LED + Fender Mount Kit - Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Powder Coat Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth Includes matching Rear Fender Bracket, Rubber Gasket and Stainless Bolts

Motone Bel Air Tail Light - LED - Black

Motone Bel Air Tail Light - LED - Shot Blast

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Shot Blast finish Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Eldorado Tail Light - LED - Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Finish  Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Eldorado Tail Light - LED - Shot Blast

Motone Big Fin Tail Light - LED - Black

Full SMD-LED circuit board. Works as Running Light, Brake Light and Number plate illumination through window on underside. Diecast Aluminium with a Black Powder Coat Designed to look good on all kinds of cafe racers, hot rods, bobbers etc. Fully E-Marked for Homologation.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Big Fin Tail Light - LED - Shot Blast

Motone Mini Bates Tail Light - Stainless Fixings - LED - BLACK

 

Motone Mini Bates Tail Light - Stainless Fixings - LED - Polish Stainless

Full LED circuit board. Running Light and Brake Light. Motone interpretation of the classic mini Bates tail light. Looks great on many styles of bikes from chops to hot rods to modern street bikes. Fully E-Marked for Homologation. Motone version comes with stainless housing and fixings instead of chrome so no rust to worry about. The stamped mini bucket that the light sits in is held to the bracket by bolts instead of rivets so wont shake loose and become useless like the chinese versions.  Finally on our light the lean angle of the bucket can be set with a nut and bolt and tightened in position.   Wired as follows : Yellow = RUNNING light Red = STOP light Black = Earth

Motone Mini Bates Tail Light - Stainless Fixings - LED - BLACK

Motone Lucas Styled LED Taillight Unit