Motone Finned Exhaust Clamps - LC -  Shot Blast Finish

Motone Finned Exhaust Clamps - LC - Shot Blast Finish

MC Part ID: MMU507

New - Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Shot Blast finish 

Now available here in strong investment cast Stainless Steel 

Inspired by the Webco finned cooling parts of the 1960s and 70s these are bolt on replacement for your stock clamps 

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton and Speed Twin because of the extra cross over pipe in the stock thruxton headers.  

Specifically design to fit 

2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, Bobber Black, T100, T120, Scrambler 1200

Fitting notes :

Note - Anyone can fit these clamps at home - 5 minutes

Due to the OEM factory design of the clamp assembly the nuts should be tightened sequentially - do not torque up one nut all the way before moving to the other but rather half a turn on each nut.

The Clamps themselves like the original Clamps are delivered in 4 pieces - these are marked UR, LR, UL, LL - Meaning Upper Right, Lower Right, Upper Left, Lower Left.

After removing the original clamps from the bike assemble the new pair of clamps (either UR/LR for right header, or UL/LL for left header) around the part of the straight part header pipe before it starts to bend.  Be sure to check the two clamp pieces are fully interconnected together around both sides of the header.

 

£129.99 (Delivery from £15.46 )
Item in Stock  |  Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

New - Big Fin Exhaust Clamps for LC Triumph Twins - Supplied here in Shot Blast finish 

Now available here in strong investment cast Stainless Steel 

Inspired by the Webco finned cooling parts of the 1960s and 70s these are bolt on replacement for your stock clamps 

These fit all the 900 and 1200 cc Triumph Twins except the Thruxton and Speed Twin because of the extra cross over pipe in the stock thruxton headers.  

Specifically design to fit 

2016 and UP : Street Twin, Street Cup, Street Scrambler, Speedmaster, Bobber, Bobber Black, T100, T120, Scrambler 1200

Fitting notes :

Note - Anyone can fit these clamps at home - 5 minutes

Due to the OEM factory design of the clamp assembly the nuts should be tightened sequentially - do not torque up one nut all the way before moving to the other but rather half a turn on each nut.

The Clamps themselves like the original Clamps are delivered in 4 pieces - these are marked UR, LR, UL, LL - Meaning Upper Right, Lower Right, Upper Left, Lower Left.

After removing the original clamps from the bike assemble the new pair of clamps (either UR/LR for right header, or UL/LL for left header) around the part of the straight part header pipe before it starts to bend.  Be sure to check the two clamp pieces are fully interconnected together around both sides of the header.

 

No Quibble Returns Policy

Content coming soon.

Motone